[Spce-user] SIP peering not charging anything

[George Mason]

Hi Daniel

Thanks for this. The requirement is to have no password authentication 
whatsoever, would this be the case with the configuration you mentioned? In 
other words, SPCE needs to route anything it gets from trusted IP, without 
a password or registration.

George


On 18 September 2014 07:33:34 Daniel Grotti <dgrotti at sipwise.com> wrote:

> Hi,
> Why you don't use a subscriber with trusted Ip configured instead of a trunk?
> You will still have PBX calling without with because it is trusted ip.
>
> Daniel
>
> On 18 Sep 2014 00:22, George Mason <george.mason at xoomtalk.com> wrote:
> >
> > Hi
> >
> > I am experimenting with creating a SIP peering to allow inbound calling
> > from a PBX with a fixed IP and no registration, in other words,
> > providing a SIP trunk to the PBX. I want all calls from the PBX to be
> > routed to the PSTN, so I have enabled force_outbound_calls_to_peer, and
> > calls do route out via the public trunks. However when I review the CDR
> > table there is no source or destination billing ID, hence rate_o_mat
> > doesn't rate the calls (I can see that it has processed them but they
> > have zero costs).
> >
> > I have checked and there is definitely a cost against the contract which
> > is associated with the new SIP peering.
> >
> > What am I missing here? Cannot see anything wrong.
> >
> > Many thanks
> >
> > George
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > https://lists.sipwise.com/listinfo/spce-user