[Spce-user] No rewrite on T.38 INVITE
Lorenzo Mangani
lorenzo.mangani at gmail.com
Wed Aug 26 09:21:43 EDT 2015
Tristan,
Did not look deep but could likely a side effect to the following error
representing over 50% of your log:
ERROR: pv [pv_trans.c:1022]: tr_eval_uri(): invalid uri [0]
Regards,
Lorenzo
On Wed, Aug 26, 2015 at 3:03 PM, Tristan Delsol <tdelsol at qfast.nl> wrote:
> Hi Daniel,
>
> I'm hoping you're not fed up with this one. I did a debug on the proxy for
> this and I noticed that for some reason the proxy reads the Callee as "0".
> But I'm not sure why. I'm not really familiar with the debug log.
> I hope you can find some spare time to have a look anyways.
> On line 959 you can see the "No matching rewrite rules for '0' found".
>
> Thanks,
> Tristan
>
> On 2015-08-25 17:13, Tristan Delsol wrote:
>
>> I asked them a couple of days back, but it's not possible. They are
>> flexible as most big telco's are.
>> I will try and sell them the idea that I will use a separate analog
>> line for faxing then or something.
>> Not sure what else to try anymore.
>>
>> Tristan
>>
>> On 25-08-15 16:43, Daniel Grotti wrote:
>>
>>> Can you disable t38 in such a broken device ?
>>>
>>>
>>> --
>>> Daniel Grotti
>>> VoIP Engineer
>>>
>>>
>>> Sipwise GmbH
>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>
>>> On 08/25/2015 04:40 PM, Tristan Delsol wrote:
>>>
>>>> Hi Daniel,
>>>>
>>>> If I send a 488 back it tries another re-invite with just g711 but then
>>>> I get the 404 not found also. So that one is not working.
>>>> Does spce check the request-uri? If so, then I can understand the 404
>>>> because of the weird request-uri.
>>>>
>>>>
>>>>
>>>> On 25-08-15 16:35, Daniel Grotti wrote:
>>>>
>>>>> Hi,
>>>>> how is that possible ?
>>>>> Did you add a section in LB like ?
>>>>>
>>>>> if(is_method("INVITE") && uri =~ "^sip:ngcp-lb;tgrp.+@")
>>>>> {
>>>>> sl_send_reply("488", "Not acceptable");
>>>>> exit;
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Daniel Grotti
>>>>> VoIP Engineer
>>>>>
>>>>>
>>>>> Sipwise GmbH
>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>>
>>>>> On 08/25/2015 04:32 PM, Tristan Delsol wrote:
>>>>>
>>>>>> Just to be sure I reinstalled the whole box and configured it as basic
>>>>>> as possible, but unfortunately still getting the 404 not found on the
>>>>>> re-invite.
>>>>>> Is there anything else I can try?
>>>>>>
>>>>>> Tristan
>>>>>>
>>>>>> On 24-08-15 11:55, Tristan Delsol wrote:
>>>>>>
>>>>>>> I tried the 488 from LB, but if I do that I still get the same 404
>>>>>>> not
>>>>>>> found. So I send the 488, the telco ACKs it and then sends a new
>>>>>>> INVITE
>>>>>>> without T.38 but the same happens with this INVITE, which is the 404
>>>>>>> not
>>>>>>> found.
>>>>>>>
>>>>>>> I have a trace of that one also if you want.
>>>>>>>
>>>>>>> On 24-08-15 11:40, Daniel Grotti wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>> something wrong in your rewriting patch, cause proxy receives:
>>>>>>>>
>>>>>>>> Call from PSTN -
>>>>>>>> R=sip:ngcp-lb at 87.239.101.193
>>>>>>>> :5060;ngcpct=7369703a3132372e302e302e313a35303830
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ID=1183523204412000183319 at 192.168.111.25_b2b-1
>>>>>>>>
>>>>>>>>
>>>>>>>> I would suggest to do not rewrite, but just reject the re-invite
>>>>>>>> with
>>>>>>>> 488 on LB if the RURI has that format.
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Daniel Grotti
>>>>>>>> VoIP Engineer
>>>>>>>>
>>>>>>>>
>>>>>>>> Sipwise GmbH
>>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>>>>>
>>>>>>>> On 08/24/2015 11:12 AM, Tristan Delsol wrote:
>>>>>>>>
>>>>>>>>> No problem. Attached.
>>>>>>>>> And thanks for the help.
>>>>>>>>>
>>>>>>>>> Tristan
>>>>>>>>>
>>>>>>>>> On 24-08-15 11:09, Daniel Grotti wrote:
>>>>>>>>>
>>>>>>>>>> would help to see LB an PROXY log.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Daniel Grotti
>>>>>>>>>> VoIP Engineer
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Sipwise GmbH
>>>>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>>>>>>>
>>>>>>>>>> On 08/24/2015 10:35 AM, Tristan Delsol wrote:
>>>>>>>>>>
>>>>>>>>>>> Daniel,
>>>>>>>>>>>
>>>>>>>>>>> I have no clue :)
>>>>>>>>>>>
>>>>>>>>>>> Here the re-invite before I rewrite the request-uri and the 404
>>>>>>>>>>> response:
>>>>>>>>>>> INVITE
>>>>>>>>>>>
>>>>>>>>>>> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060
>>>>>>>>>>> ;ngcpct=7369703a3132372e302e302e313a35303830
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> SIP/2.0
>>>>>>>>>>> Via: SIP/2.0/UDP
>>>>>>>>>>> 139.156.126.49:5060;branch=z9hG4bKfofomd006o71lno6s1i0.1
>>>>>>>>>>> Call-ID: 585966869312000201754 at 192.168.111.25_b2b-1
>>>>>>>>>>> From:
>>>>>>>>>>> <sip:+31306665648 at ims.imscore.net
>>>>>>>>>>> >;tag=SDemtl399-127.0.0.1alUtKGp-09752+1+a3000095+156d2c30
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> To:
>>>>>>>>>>> <sip:+31756418049 at 192.168.111.25
>>>>>>>>>>> >;tag=3D534336-55D9A6A9000B9F71-7E3B2700
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> CSeq: 98894742 INVITE
>>>>>>>>>>> Expires: 180
>>>>>>>>>>> Contact: <sip:+31306665648 at 139.156.126.49:5060;transport=udp>
>>>>>>>>>>> Min-SE: 90
>>>>>>>>>>> Session-Expires: 7200;refresher=uac
>>>>>>>>>>> Supported: replaces, path, 100rel, timer
>>>>>>>>>>> Content-Length: 276
>>>>>>>>>>> Allow: INVITE, BYE, REGISTER, ACK, OPTIONS, CANCEL, SUBSCRIBE,
>>>>>>>>>>> NOTIFY,
>>>>>>>>>>> PRACK, INFO, REFER, UPDATE, PUBLISH, MESSAGE
>>>>>>>>>>> Max-Forwards: 69
>>>>>>>>>>> Content-Type: application/sdp
>>>>>>>>>>> User-Agent: Alcatel-Lucent 5060 MGC-8 9.2.0.4.0.11
>>>>>>>>>>> Route:
>>>>>>>>>>>
>>>>>>>>>>> <sip:87.239.101.193;r2=on;lr=on;ftag=3D534336-55D9A6A9000B9F71-7E3B2700;ngcplb=yes>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Route:
>>>>>>>>>>>
>>>>>>>>>>> <sip:127.0.0.1;r2=on;lr=on;ftag=3D534336-55D9A6A9000B9F71-7E3B2700;ngcplb=yes>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> v=0
>>>>>>>>>>> o=- 3649316138 3649316139 IN IP4 139.156.126.49
>>>>>>>>>>> s=-
>>>>>>>>>>> c=IN IP4 139.156.126.49
>>>>>>>>>>> t=0 0
>>>>>>>>>>> m=image 23680 udptl t38
>>>>>>>>>>> a=T38FaxVersion:0
>>>>>>>>>>> a=T38MaxBitRate:14400
>>>>>>>>>>> a=T38FaxRateManagement:transferredTCF
>>>>>>>>>>> a=T38FaxMaxBuffer:72
>>>>>>>>>>> a=T38FaxMaxDatagram:316
>>>>>>>>>>> a=T38FaxUdpEC:t38UDPRedundancy
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> SIP/2.0 404 Not Found
>>>>>>>>>>> Via: SIP/2.0/UDP
>>>>>>>>>>> 139.156.126.49:5060
>>>>>>>>>>> ;rport=5060;branch=z9hG4bKfofomd006o71lno6s1i0.1
>>>>>>>>>>> Call-ID: 585966869312000201754 at 192.168.111.25_b2b-1
>>>>>>>>>>> From:
>>>>>>>>>>> <sip:+31306665648 at ims.imscore.net
>>>>>>>>>>> >;tag=SDemtl399-127.0.0.1alUtKGp-09752+1+a3000095+156d2c30
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> To:
>>>>>>>>>>> <sip:+31756418049 at 192.168.111.25
>>>>>>>>>>> >;tag=3D534336-55D9A6A9000B9F71-7E3B2700
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> CSeq: 98894742 INVITE
>>>>>>>>>>> Server: Sipwise NGCP Proxy 3.X
>>>>>>>>>>> Content-Length: 0
>>>>>>>>>>>
>>>>>>>>>>> Tristan
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 24-08-15 09:08, Daniel Grotti wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>> how can you receive a 404 on a re-invite ?
>>>>>>>>>>>> Does the re-invite have the From-tag and To-tag ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Daniel Grotti
>>>>>>>>>>>> VoIP Engineer
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Sipwise GmbH
>>>>>>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria |
>>>>>>>>>>>> www.sipwise.com
>>>>>>>>>>>>
>>>>>>>>>>>> On 08/24/2015 12:23 AM, Tristan Delsol wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Checked a lot of things but I'm still getting a 404 not found
>>>>>>>>>>>>> from
>>>>>>>>>>>>> spce.
>>>>>>>>>>>>> I managed to change the request-uri from
>>>>>>>>>>>>>
>>>>>>>>>>>>> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060
>>>>>>>>>>>>> ;ngcpct=7369703a3132372e302e302e313a35303830
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> to
>>>>>>>>>>>>> sip:ngcp-lb at 87.239.101.193
>>>>>>>>>>>>> :5060;ngcpct=7369703a3132372e302e302e313a35303830,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> but I'm still getting a 404 not found.
>>>>>>>>>>>>> Shouldn't this work?
>>>>>>>>>>>>> I mean the spce is sending this as Contact.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Tristan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 2015-08-21 14:25, Daniel Grotti wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>> yes something like:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> if(is_method("INVITE") && uri =~ "^sip:ngcp-lb;tgrp.+@")
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Daniel Grotti
>>>>>>>>>>>>>> VoIP Engineer
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sipwise GmbH
>>>>>>>>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria |
>>>>>>>>>>>>>> www.sipwise.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 08/20/2015 07:44 PM, Tristan Delsol wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Daniel,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The only problem is actually that the telco sends this weird
>>>>>>>>>>>>>>> invite
>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>> the following request-uri:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> sip:ngcp-lb;tgrp=9752;trunk-context=ipic.imscore.net at 87.239.101.193:5060
>>>>>>>>>>>>>>> ;ngcpct=7369703a3132372e302e302e313a35303830
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If I could maybe rewrite this to remove the
>>>>>>>>>>>>>>> ";tgrp=9752;trunk-context=ipic.imscore.net" or send a 488
>>>>>>>>>>>>>>> then I
>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>> be good.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Could I add something to
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.customtt.tt2
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> like
>>>>>>>>>>>>>>> if(is_method("INVITE") &&
>>>>>>>>>>>>>>> search("tgrp=9752;trunk-context=ipic.imscore.net"))
>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>> sl_send_reply("488", "Not Acceptable Here");
>>>>>>>>>>>>>>> exit;
>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>> Tristan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 2015-08-20 16:15, Tristan Delsol wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The reason is that the interconnect with our telco is
>>>>>>>>>>>>>>>> tripping
>>>>>>>>>>>>>>>> over
>>>>>>>>>>>>>>>> our contact-header of ngcplb@<ip> only with T.38, because
>>>>>>>>>>>>>>>> of the
>>>>>>>>>>>>>>>> re-invite.
>>>>>>>>>>>>>>>> They hide behind the fact that they have a spec for the
>>>>>>>>>>>>>>>> interconnect
>>>>>>>>>>>>>>>> that only wants phonenumber@<ip>or<dns> in the
>>>>>>>>>>>>>>>> contact-header.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On 20-08-15 16:05, Daniel Grotti wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>> any reason for that ?
>>>>>>>>>>>>>>>>> The callee should reply 488, not the server.
>>>>>>>>>>>>>>>>> Anyway, I remember some old threasd about that:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> https://lists.sipwise.com/pipermail/spce-user/2014-June/006788.html
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Maybe this could help.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Daniel Grotti
>>>>>>>>>>>>>>>>> VoIP Engineer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Sipwise GmbH
>>>>>>>>>>>>>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria |
>>>>>>>>>>>>>>>>> www.sipwise.com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 08/20/2015 03:41 PM, Tristan Delsol wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Back again on this :)
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> One more thing. Would it be possible to disable T.38
>>>>>>>>>>>>>>>>>> support
>>>>>>>>>>>>>>>>>> somehow. So
>>>>>>>>>>>>>>>>>> that if the RE-INVITE comes in that we send back a 488?
>>>>>>>>>>>>>>>>>> Or maybe I can set it up for certain subscriber numbers?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>> Tristan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On 17-08-15 17:01, Tristan Delsol wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks for the info. I will experiment with that to see
>>>>>>>>>>>>>>>>>>> if it
>>>>>>>>>>>>>>>>>>> works.
>>>>>>>>>>>>>>>>>>> Then I will check if we would really want that or not.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Tristan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 17-08-15 16:58, Andrew Pogrebennyk wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 08/17/2015 03:39 PM, Tristan Delsol wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> They state that they don't support that format for the
>>>>>>>>>>>>>>>>>>>>> contact
>>>>>>>>>>>>>>>>>>>>> header.
>>>>>>>>>>>>>>>>>>>>> They have it in the specs for the interconnect that the
>>>>>>>>>>>>>>>>>>>>> contact
>>>>>>>>>>>>>>>>>>>>> header
>>>>>>>>>>>>>>>>>>>>> can only contain the following:
>>>>>>>>>>>>>>>>>>>>> sip:+«ISN»@«ip-address/URL»:«port» with optional
>>>>>>>>>>>>>>>>>>>>> user=”phone”, so
>>>>>>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>>>>>>> example sip:+31703434343 at domain.net:5060;user=”phone”.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Where
>>>>>>>>>>>>>>>>>>>>> ISN: International Subscriber Number
>>>>>>>>>>>>>>>>>>>>> port: UDP portnumber;
>>>>>>>>>>>>>>>>>>>>> URL: Uniform Resource Locator: domain name;
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Is it possible I can adjust the contact header for this
>>>>>>>>>>>>>>>>>>>>> kind of
>>>>>>>>>>>>>>>>>>>>> request
>>>>>>>>>>>>>>>>>>>>> to keep the format as needed?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Unfortunately this is not something you can easily
>>>>>>>>>>>>>>>>>>>> achieve,
>>>>>>>>>>>>>>>>>>>> but if
>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>> have some understanding of kamailio config scripts you
>>>>>>>>>>>>>>>>>>>> can
>>>>>>>>>>>>>>>>>>>> try to
>>>>>>>>>>>>>>>>>>>> modify
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> /etc/ngcp-config/templates/etc/kamailio/lb/kamailio.cfg.tt2
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> and disable the Contact masking completely, e.g.
>>>>>>>>>>>>>>>>>>>> comment out
>>>>>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>>>>>> calls
>>>>>>>>>>>>>>>>>>>> of ROUTE_MASK_CONTACT and ROUTE_UNMASK_CONTACT as a
>>>>>>>>>>>>>>>>>>>> starting
>>>>>>>>>>>>>>>>>>>> point.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Then each side will receive the internal IP of b2b as
>>>>>>>>>>>>>>>>>>>> Contact:
>>>>>>>>>>>>>>>>>>>> sip:127.0.0.1:5080, which exposes your topology a bit
>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>> outside
>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>> still doesn't break the protocol. But we are not
>>>>>>>>>>>>>>>>>>>> sending the
>>>>>>>>>>>>>>>>>>>> number part
>>>>>>>>>>>>>>>>>>>> which might be a problem for them (they didn't say that
>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>> number
>>>>>>>>>>>>>>>>>>>> part
>>>>>>>>>>>>>>>>>>>> is optional). Sorry I can't help you out more at this
>>>>>>>>>>>>>>>>>>>> time.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>> Andrew
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Spce-user mailing list
>>>>>>>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>
>>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150826/2ce79b6b/attachment-0001.html>
More information about the Spce-user
mailing list