[Spce-user] second network interface

[Andres Gmail]

Maybe

ngcp-network --move-from=eth0 --move-to=eth1 --type=web_ext 
--type=sip_ext --type=rtp_ext -- type=ssh_ext --type=web_int



El 19/02/15 a las 17:48, Mykola Zaika escribió:
> Hello,
> I added second network interface to my sipwise CE (eth1). But all my 
> traffic go via Eth0. What I`m doing wrong?
>
> 1. vi /etc/network/interfaces
>
> auto lo
> iface lo inet loopback
>
> # The primary network interface
> auto eth0
> iface eth0 inet static
> address 10.200.10.250
> netmask 255.255.255.0
> gateway 10.200.10.254
> dns-nameservers 10.130.10.12
>
> auto eth1
> iface eth1 inet static
> address 10.130.10.250
> netmask 255.255.255.0
>
> 2.run comands :
> - ngcp-network --set-interface=eth1 --ip=10.130.10.250 
> --netmask=255.255.255.0
>
> - ngcp-network --move-from=lo --move-to=eth1 --type=web_ext 
> --type=sip_ext --type=rtp_ext -- type=ssh_ext --type=web_int
>
> 3. ngcpcfg apply
>
>
> -- 
> З повагою,
> Микола Заїка
> Компанія VoIPTime,
> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> www.voiptime.net <http://www.voiptime.net>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-- 
Saludos
---
Andrés Ruiz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150219/d484759f/attachment-0001.html>