[Spce-user] second network interface

[William Fulton]

From: William Fulton 
Sent: Thursday, February 19, 2015 8:53 AM
To: 'Mykola Zaika'
Subject: RE: [Spce-user] second network interface

 

If you have already assigned these functions to eth0, you must change your syntax in step 2 to:

--move-from=eth0 instead of --move-from=lo

 

From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Mykola Zaika
Sent: Thursday, February 19, 2015 8:48 AM
To: Spce-user
Subject: [Spce-user] second network interface

 

Hello,

I added second network interface to my sipwise CE (eth1). But all my traffic go via Eth0. What I`m doing wrong?

1. vi /etc/network/interfaces

auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 10.200.10.250
netmask 255.255.255.0
gateway 10.200.10.254
dns-nameservers 10.130.10.12

auto eth1
iface eth1 inet static
address 10.130.10.250
netmask 255.255.255.0

2.run comands :

- ngcp-network --set-interface=eth1 --ip=10.130.10.250 --netmask=255.255.255.0

- ngcp-network --move-from=lo --move-to=eth1 --type=web_ext --type=sip_ext --type=rtp_ext -- type=ssh_ext --type=web_int

3. ngcpcfg apply




-- 

З повагою,

Микола Заїка

Компанія VoIPTime,

Тел: +380 32 2328022 <tel:%2B380%2032%202328022> 

mzaika at voiptime.net

www.voiptime.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150219/8f54e525/attachment-0001.html>