[Spce-user] second network interface
Daniel Grotti
dgrotti at sipwise.com
Thu Feb 19 15:32:43 EST 2015
It depends what do you want to do.
Do you want to use the second interface as external interface ?
Cause if it's so, you need to change your config.
Please explain what do you have to do.
Daniel
On 02/19/2015 09:20 PM, Mykola Zaika wrote:
> I moved the "cluster sets" section to the Eth0. Is that correct? Where
> can I find some example network.yml with two network intefaces?
> hosts:
> self:
> dbnode: 1
> eth0:
> ip: 10.200.10.250
> netmask: 255.255.255.0
> type:
> - web_int
> - ssh_ext
> - web_ext
> - sip_int
> - rtp_int
> cluster_sets:
> - default
> ip: 127.0.0.1
> netmask: 255.255.255.0
> shared_ip: []
> shared_v6ip: []
> type:
> - ha_int
> - aux_ext
> v6ip: '::1'
> eth1:
> ip: 10.130.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - sip_ext
> - rtp_ext
> - ssh_ext
> - web_int
> interfaces:
> - lo
> - eth0
> - eth1
> lo:
> role:
> - proxy
> - lb
> - mgmt
> - rtp
> - db
>
> 19 лют. 2015 19:44, користувач "Daniel Grotti" <dgrotti at sipwise.com
> <mailto:dgrotti at sipwise.com>> написав:
>
> You should move the cluster_set section to eth0 which is your new
> internal interface.
>
> Why you add a new interface? To get rid of localhost? Or to add a
> new public ip for sip ?
>
> On 19 Feb 2015 18:39, Mykola Zaika <mzaika at voiptime.net
> <mailto:mzaika at voiptime.net>> wrote:
>
> hosts:
> self:
> dbnode: 1
> eth0:
> ip: 10.200.10.250
> netmask: 255.255.255.0
> type:
> - web_int
> - ssh_ext
> - web_ext
> - sip_int
> - rtp_int
> eth1:
> ip: 10.130.10.250
> netmask: 255.255.255.0
> type:
> - web_ext
> - sip_ext
> - rtp_ext
> - ssh_ext
> - web_int
> interfaces:
> - lo
> - eth0
> - eth1
> lo:
> cluster_sets:
> - default
> ip: 127.0.0.1
> netmask: 255.255.255.0
> shared_ip: []
> shared_v6ip: []
> type:
> - ha_int
> - aux_ext
> v6ip: '::1'
> role:
> - proxy
> - lb
> - mgmt
> - rtp
> - db
>
>
> --
> З повагою,
> Микола Заїка
> Компанія VoIPTime,
> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> www.voiptime.net <http://www.voiptime.net>
>
> 2015-02-19 19:36 GMT+02:00 Daniel Grotti <dgrotti at sipwise.com
> <mailto:dgrotti at sipwise.com>>:
>
> Sip_int should be assigned to 'lo' only.
> Can you share your network.yml ?
>
> On 19 Feb 2015 18:30, Mykola Zaika <mzaika at voiptime.net
> <mailto:mzaika at voiptime.net>> wrote:
>
> Yes, I assigned Eth0 as type=sip_int, type= rtp_int and
> Eth1 as type=sip_ext, type=rtp_ext.
>
>
> --
> З повагою,
> Микола Заїка
> Компанія VoIPTime,
> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> www.voiptime.net <http://www.voiptime.net>
>
> 2015-02-19 19:15 GMT+02:00 Daniel Grotti
> <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>:
>
> Did you specify sip_ext to eth1?
> On 19 Feb 2015 18:05, Mykola Zaika
> <mzaika at voiptime.net <mailto:mzaika at voiptime.net>>
> wrote:
> >
> > I need both interfaces. When I change
> move-from=eth0 instead of --move-from=lo
> > than Eth0 does not work.
> >
> > --
> > З повагою,
> > Микола Заїка
> > Компанія VoIPTime,
> > Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> > mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> > www.voiptime.net <http://www.voiptime.net>
> >
> > 2015-02-19 18:53 GMT+02:00 William Fulton
> <wfulton at thirdhatch.com
> <mailto:wfulton at thirdhatch.com>>:
> >>
> >>
> >>
> >>
> >>
> >> From: William Fulton
> >> Sent: Thursday, February 19, 2015 8:53 AM
> >> To: 'Mykola Zaika'
> >> Subject: RE: [Spce-user] second network interface
> >>
> >>
> >>
> >> If you have already assigned these functions to
> eth0, you must change your syntax in step 2 to:
> >>
> >> --move-from=eth0 instead of --move-from=lo
> >>
> >>
> >>
> >> From: Spce-user
> [mailto:spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>] On
> Behalf Of Mykola Zaika
> >> Sent: Thursday, February 19, 2015 8:48 AM
> >> To: Spce-user
> >> Subject: [Spce-user] second network interface
> >>
> >>
> >>
> >> Hello,
> >>
> >> I added second network interface to my sipwise CE
> (eth1). But all my traffic go via Eth0. What I`m
> doing wrong?
> >>
> >> 1. vi /etc/network/interfaces
> >>
> >> auto lo
> >> iface lo inet loopback
> >>
> >> # The primary network interface
> >> auto eth0
> >> iface eth0 inet static
> >> address 10.200.10.250
> >> netmask 255.255.255.0
> >> gateway 10.200.10.254
> >> dns-nameservers 10.130.10.12
> >>
> >> auto eth1
> >> iface eth1 inet static
> >> address 10.130.10.250
> >> netmask 255.255.255.0
> >>
> >> 2.run comands :
> >>
> >> - ngcp-network --set-interface=eth1
> --ip=10.130.10.250 --netmask=255.255.255.0
> >>
> >> - ngcp-network --move-from=lo --move-to=eth1
> --type=web_ext --type=sip_ext --type=rtp_ext --
> type=ssh_ext --type=web_int
> >>
> >> 3. ngcpcfg apply
> >>
> >>
> >> --
> >>
> >> З повагою,
> >>
> >> Микола Заїка
> >>
> >> Компанія VoIPTime,
> >>
> >> Тел: +380 32 2328022 <tel:%2B380%2032%202328022>
> >>
> >> mzaika at voiptime.net <mailto:mzaika at voiptime.net>
> >>
> >> www.voiptime.net <http://www.voiptime.net>
> >>
> >>
> >> _______________________________________________
> >> Spce-user mailing list
> >> Spce-user at lists.sipwise.com
> <mailto:Spce-user at lists.sipwise.com>
> >> https://lists.sipwise.com/listinfo/spce-user
> >>
> >
>
>
>
More information about the Spce-user
mailing list