[Spce-user] disconnect call after 1 minute

[Daniel Grotti]

Do you have session timers involved ?

We would need the trace or at least the proxy/lb logs.

Daniel


On 02/16/2015 02:54 PM, Tóth Csaba wrote:
> Hi,
> 
> during the past days we tried to investigate this. Now i have a more
> specific explanation:
> 
> We have two different subscribers in the sipwise box.
> We have another host with an asterisk installed, and this asterisk
> connects to these subscribers. Two different SIP user connects to the
> asterisk, and they make a call to each other.
> The call is ok, soud is ok, but the call is disconnected exactly after
> 60 sec running time.
> We traced the packets with wireshark, the lb sends the first bye.
> 
> If i connect a voip phone to any of the subscribers it works, just when
> the asterisk is connected to both of the subscribers comes the
> disconnection. And the 59.64 secundum is also interesting.
> 
> What can be the problem?
> 
> Thanks in advance!
> Csaba
> 
> 
> 
> 2015.02.13. 15:25 keltezéssel, Tóth Csaba írta:
>> Dear List and SipWise Team,
>>
>> We use SPCE 3.7.1, and inhouse (internal subscriber to subscriber) calls
>> after about 1 minute they disconnects.
>> We traced the packets and see the SPCE sends a normal BYE to the called
>> party after about 1 minute. During the call the voice sound is good.
>> I googled and i read something about session timers, but i don't know
>> how to tune or debug this.
>>
>> I can send the pcap file, but just in private.
>>
>> Thank for any help,
>> Csaba
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>