[Spce-user] Peering two SPCE over TLS

[Daniel Grotti]

Hi,
did you commented out all the lines in
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2 ?

domain=<your peer realm>
user=<your peer user>
pwd=<your peer password>
proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
[% IF sip_adv_ips.size -%]
contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
[% ELSE -%]
contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
[% END -%]


contact line is missing, you should see something like:

cat /etc/ngcp-sems/etc/reg_agent.conf

domain=ip_ext:static
user=100011
pwd=pincode100011
proxy=sip:127.0.0.1:5060
contact=sip:XX.XX.XX.XX:5060



Daniel


On 01/19/2015 02:11 PM, H Yavari wrote:
> Hi,
> It is my scenario:
>
> CPE(#1)        <------------------------>    CPE(#2)
> ip_ext: dynamic                               ip_ext:static
>
> I want create a sip trunk between them.
> I defined a peer server in CPE#1 for communicating with CPE#2. I did
> below configurations too:
> (/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2)
>
> domain=ip_ext:static
> user=100011
> pwd=pincode100011
> proxy=sip:127.0.0.1:5060
>
> But CPE#1 not registered in CPE#2.
>
> What is the best solution for trubking between 2 CPE?
>
>
> Thanks for helps.
>
> Regards,
> H. Yavari
>
>
>
> ------------------------------------------------------------------------
> *From:* Daniel Grotti <dgrotti at sipwise.com>
>
>
> Hi,
> looks like the tcp connection got timeout.
> Are you sure to have the port you need opened (5060 tcp and 5061 tcp) ?
>
> Daniel
>
>
> ------------------------------------------------------------------------
>
>
> *From: *"H Yavari" <hyavari at rocketmail.com>
> *To: *"Daniel Grotti" <dgrotti at sipwise.com>, spce-user at lists.sipwise.com
> *Sent: *Sunday, January 18, 2015 8:43:42 AM
> *Subject: *Re: [Spce-user] Peering two SPCE over TLS
>
> Hi,
> I tested it with TCP and I received "ERROR: <core> [tcp_main.c:4422]:
> tcpconn_main_timeout(): connect Public IP of peer server :5060 failed
> (timeout)"
>
>
> Regards,
> H. Yavari
> ------------------------------------------------------------------------
> *From:* Daniel Grotti <dgrotti at sipwise.com>
>
>
> No, as long as the message its relay in TLS with no errors, there are
> no problems.
> I guess it fails for timeout, since you don't get any message on the
> peer side, isn't?
> Daniel
>
>
> On 17 Jan 2015 14:17, H Yavari <hyavari at rocketmail.com> wrote:
>
>     Hi,
>
>     Yes I checked, There isn't any error and I see "transport=tls" too.
>     I should define any thing on the other server?
>
>
>     Regards,
>     H. Yavari
>
>     ------------------------------------------------------------------------
>     *From:* Daniel Grotti <dgrotti at sipwise.com>
>
>
>     Can you check in the LB log you see what's happening? Do you see
>     errors? Do you see its using TLS socket ?
>     Daniel
>
>
>     On 17 Jan 2015 13:35, H Yavari <hyavari at rocketmail.com> wrote:
>
>         Hi,
>         I mean in the proxy-log, not any request received by peer
>         server. Yes I checked and TLS is enabled on 5061 port.
>
>         Regards,
>         H. Yavari
>
>         ------------------------------------------------------------------------
>         *From:* Daniel Grotti <dgrotti at sipwise.com>
>
>
>         Hi,
>         What do you mean no message received on the peer?
>         Did you enable TLS on your server in config.yml?
>
>         What does the kamailio-lb.log say?
>
>         DanielOn 17 Jan 2015 13:08, H Yavari <hyavari at rocketmail.com
>         <mailto:hyavari at rocketmail.com>> wrote:
>         >
>         > Hi,
>         >
>         > I want to create a trunk between 2 CPE in the internet over
>         TLS, and only one of them has static ip address. I checked
>         config.yml too and TLS is enabled on both server.
>         > So I defined an peer server with TLS protocol over port 5061
>         in that server that has dynamic ip. But when I make a call on
>         this server, not any request received in the other Server.
>         (Everything is ok over UDP )
>         >
>         > How can I solve this ? Should I defined any peer on the
>         other Server?
>         >
>         >
>         >
>         > Regards,
>         > H. Yavari
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150120/d35da9f5/attachment-0001.html>