[Spce-user] Peering two SPCE over TLS

[H Yavari]

Hi,cat  /etc/ngcp-sems/etc/reg_agent.conf output:
domain=X.X.X.X (ip static)
user=100011
pwd=pincode100011
proxy=sip:127.0.0.1:5060
contact=sip:192.168.X.Z:5060 (ip internal)
proxy and contact info applied automatically after "ngcpcfg apply".
I checked subscriber 100011 in the peer server but not registered any device for it.

Thanks for helps. 
  Regards, H. Yavari

      From: Daniel Grotti <dgrotti at sipwise.com>

 Hi,
 did you commented out all the lines in /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2 ?
 
 domain=<your peer realm>
 user=<your peer user>
 pwd=<your peer password>
 proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
 [% IF sip_adv_ips.size -%]
 contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
 [% ELSE -%]
 contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
 [% END -%]
 
 
 contact line is missing, you should see something like:
 
 cat /etc/ngcp-sems/etc/reg_agent.conf
 
 domain=ip_ext:static
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060
 contact=sip:XX.XX.XX.XX:5060
 
 
 
 Daniel
 
 
 On 01/19/2015 02:11 PM, H Yavari wrote:
  
 

   Hi, It is my scenario: 
  
  CPE(#1)        <------------------------>    CPE(#2) ip_ext: dynamic                               ip_ext:static 
  I want create a sip trunk between them. I defined a peer server in CPE#1 for communicating with CPE#2. I did below configurations too: (/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2)
  
  domain=ip_ext:static
 user=100011
 pwd=pincode100011
 proxy=sip:127.0.0.1:5060
  
  But CPE#1 not registered in CPE#2. 
  What is the best solution for trubking between 2 CPE? 
  
      Thanks for helps. 
  Regards, H. Yavari 
 
 
        From: Daniel Grotti <dgrotti at sipwise.com>
 
   
    Hi, looks like the tcp connection got timeout. Are you sure to have the port you need opened (5060 tcp and 5061 tcp) ? 
  Daniel 
  
   
 
   From: "H Yavari" <hyavari at rocketmail.com>
 To: "Daniel Grotti" <dgrotti at sipwise.com>, spce-user at lists.sipwise.com
 Sent: Sunday, January 18, 2015 8:43:42 AM
 Subject: Re: [Spce-user] Peering two SPCE over TLS
 
   Hi, I tested it with TCP and I received "ERROR: <core> [tcp_main.c:4422]: tcpconn_main_timeout(): connect Public IP of peer server :5060 failed (timeout)" 
  
  
  Regards, H. Yavari
      From: Daniel Grotti <dgrotti at sipwise.com>
 
  
   No, as long as the message its relay in  TLS with no errors, there are no problems. I guess it fails for timeout, since you  don't get any message on the peer side, isn't? Daniel 
 
    On 17 Jan 2015 14:17, H Yavari <hyavari at rocketmail.com> wrote:
 
   Hi, 
  Yes I checked, There isn't any error and I see "transport=tls" too. I should define any thing on the other server? 
  
  Regards, H. Yavari 
     From: Daniel Grotti<dgrotti at sipwise.com>
 
  
   Can you check in the LB log you see what's happening? Do you see  errors? Do you see its using TLS socket ? Daniel 
 
   On 17 Jan 2015 13:35, H Yavari <hyavari at rocketmail.com> wrote:
 
   Hi, I mean in the proxy-log, not any request received by peer server.  Yes I checked and TLS is enabled on 5061 port. 
  Regards, H. Yavari 
     From: Daniel Grotti<dgrotti at sipwise.com>
 
  
 Hi,
  What do you mean no message received on the peer?
  Did you enable TLS on your server in config.yml?
  
  What does the kamailio-lb.log say?
  
  DanielOn 17 Jan 2015 13:08, H Yavari <hyavari at rocketmail.com> wrote:
  >
  > Hi,
  >
  > I want to create a trunk between 2 CPE in the internet over  TLS, and only one of them has static ip address. I checked config.yml too and TLS is enabled on both server.
  > So I defined an peer server with TLS protocol over port 5061 in  that server that has dynamic ip. But when I make a call on  this server, not any request received in the other Server.  (Everything is ok over UDP )
  >
  > How can I solve this ? Should I defined any peer on the  other Server? 
  >
  >
  >
  > Regards,
  > H. Yavari
  
 
      
     
 
      
     
 
        
     
 
        
 _______________________________________________
 Spce-user mailing list
 Spce-user at lists.sipwise.com
 https://lists.sipwise.com/listinfo/spce-user
  
 
     
  
 _______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
 
 
 
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150120/ef43db4a/attachment-0001.html>