[Spce-user] Peering two SPCE over TLS

Daniel Grotti dgrotti at sipwise.com
Tue Jan 20 06:59:47 EST 2015


If you check kamailio-lb you should see logs line like "b2bua outbound
registration".


Daniel



On 01/20/2015 12:55 PM, H Yavari wrote:
> Hi,
> cat /etc/ngcp-sems/etc/reg_agent.conf output:
>
> domain=X.X.X.X (ip static)
> user=100011
> pwd=pincode100011
> proxy=sip:127.0.0.1:5060
> contact=sip:192.168.X.Z:5060 (ip internal)
>
> proxy and contact info applied automatically after "ngcpcfg apply".
>
> I checked subscriber 100011 in the peer server but not registered any
> device for it.
>
>
> Thanks for helps.
>
> Regards,
> H. Yavari
>
>
> ------------------------------------------------------------------------
> *From:* Daniel Grotti <dgrotti at sipwise.com>
> **
> Hi,
> did you commented out all the lines in
> /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2 ?
>
> domain=<your peer realm>
> user=<your peer user>
> pwd=<your peer password>
> proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
> [% IF sip_adv_ips.size -%]
> contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
> [% ELSE -%]
> contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
> [% END -%]
>
>
> contact line is missing, you should see something like:
>
> cat /etc/ngcp-sems/etc/reg_agent.conf
>
> domain=ip_ext:static
> user=100011
> pwd=pincode100011
> proxy=sip:127.0.0.1:5060
> contact=sip:XX.XX.XX.XX:5060
>
>
>
> Daniel
>
>
> On 01/19/2015 02:11 PM, H Yavari wrote:
>>
>>
>> Hi,
>> It is my scenario:
>>
>> CPE(#1)        <------------------------>    CPE(#2)
>> ip_ext: dynamic                               ip_ext:static
>>
>> I want create a sip trunk between them.
>> I defined a peer server in CPE#1 for communicating with CPE#2. I did
>> below configurations too:
>> (/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2)
>>
>> domain=ip_ext:static
>> user=100011
>> pwd=pincode100011
>> proxy=sip:127.0.0.1:5060
>>
>> But CPE#1 not registered in CPE#2.
>>
>> What is the best solution for trubking between 2 CPE?
>>
>>
>> Thanks for helps.
>>
>> Regards,
>> H. Yavari
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Daniel Grotti <dgrotti at sipwise.com> <mailto:dgrotti at sipwise.com>
>>
>>
>> Hi,
>> looks like the tcp connection got timeout.
>> Are you sure to have the port you need opened (5060 tcp and 5061 tcp) ?
>>
>> Daniel
>>
>>
>> ------------------------------------------------------------------------
>>
>>
>> *From: *"H Yavari" <hyavari at rocketmail.com>
>> <mailto:hyavari at rocketmail.com>
>> *To: *"Daniel Grotti" <dgrotti at sipwise.com>
>> <mailto:dgrotti at sipwise.com>, spce-user at lists.sipwise.com
>> <mailto:spce-user at lists.sipwise.com>
>> *Sent: *Sunday, January 18, 2015 8:43:42 AM
>> *Subject: *Re: [Spce-user] Peering two SPCE over TLS
>>
>> Hi,
>> I tested it with TCP and I received "ERROR: <core> [tcp_main.c:4422]:
>> tcpconn_main_timeout(): connect Public IP of peer server :5060 failed
>> (timeout)"
>>
>>
>> Regards,
>> H. Yavari
>> ------------------------------------------------------------------------
>> *From:* Daniel Grotti <dgrotti at sipwise.com> <mailto:dgrotti at sipwise.com>
>>
>>
>> No, as long as the message its relay in TLS with no errors, there are
>> no problems.
>> I guess it fails for timeout, since you don't get any message on the
>> peer side, isn't?
>> Daniel
>>
>>
>> On 17 Jan 2015 14:17, H Yavari <hyavari at rocketmail.com>
>> <mailto:hyavari at rocketmail.com> wrote:
>>
>>     Hi,
>>
>>     Yes I checked, There isn't any error and I see "transport=tls" too.
>>     I should define any thing on the other server?
>>
>>
>>     Regards,
>>     H. Yavari
>>
>>     ------------------------------------------------------------------------
>>     *From:* Daniel Grotti <dgrotti at sipwise.com>
>>     <mailto:dgrotti at sipwise.com>
>>
>>
>>     Can you check in the LB log you see what's happening? Do you see
>>     errors? Do you see its using TLS socket ?
>>     Daniel
>>
>>
>>     On 17 Jan 2015 13:35, H Yavari <hyavari at rocketmail.com>
>>     <mailto:hyavari at rocketmail.com> wrote:
>>
>>         Hi,
>>         I mean in the proxy-log, not any request received by peer
>>         server. Yes I checked and TLS is enabled on 5061 port.
>>
>>         Regards,
>>         H. Yavari
>>
>>         ------------------------------------------------------------------------
>>         *From:* Daniel Grotti <dgrotti at sipwise.com>
>>         <mailto:dgrotti at sipwise.com>
>>
>>
>>         Hi,
>>         What do you mean no message received on the peer?
>>         Did you enable TLS on your server in config.yml?
>>
>>         What does the kamailio-lb.log say?
>>
>>         DanielOn 17 Jan 2015 13:08, H Yavari <hyavari at rocketmail.com
>>         <mailto:hyavari at rocketmail.com>> wrote:
>>         >
>>         > Hi,
>>         >
>>         > I want to create a trunk between 2 CPE in the internet over
>>         TLS, and only one of them has static ip address. I checked
>>         config.yml too and TLS is enabled on both server.
>>         > So I defined an peer server with TLS protocol over port
>>         5061 in that server that has dynamic ip. But when I make a
>>         call on this server, not any request received in the other
>>         Server. (Everything is ok over UDP )
>>         >
>>         > How can I solve this ? Should I defined any peer on the
>>         other Server?
>>         >
>>         >
>>         >
>>         > Regards,
>>         > H. Yavari
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> https://lists.sipwise.com/listinfo/spce-user
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150120/b4d82f10/attachment-0001.html>


More information about the Spce-user mailing list