[Spce-user] No audio for Voicebox mr3.8.1

Crexpedio Support Team jesse at crexpedio.com
Sat Jun 6 17:43:51 EDT 2015


Thank you Daniel,

I have not modified any of these settings, below is the config:

RUN_RTPENGINE=yes
#LISTEN_UDP=127.0.0.1:2222
LISTEN_NG=127.0.0.1:2223
INTERFACES="ext/10.237.162.56!54.83.27.120"
TIMEOUT=60
SILENT_TIMEOUT=3600
PIDFILE=/var/run/ngcp-rtpengine-daemon.pid
FORK=yes
TOS=184
TABLE=0
PORT_MIN=30000
PORT_MAX=40000
B2B_URL=http://%%:8090/
NO_FALLBACK=no
LOG_LEVEL=6



here is a tcpdump capture: (This sipwise install is running on the Amazon Cloud) I am attaching useful  network info as well.

eth0      Link encap:Ethernet  HWaddr 22:00:0b:b2:24:6d
          inet addr:10.237.162.56  Bcast:10.237.162.255  Mask:255.255.255.0
          inet6 addr: fe80::2000:bff:feb2:246d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:26451 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8955 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4905781 (4.6 MiB)  TX bytes:9751050 (9.2 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:57998 errors:0 dropped:0 overruns:0 frame:0
          TX packets:57998 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12892590 (12.2 MiB)  TX bytes:12892590 (12.2 MiB)

root at secure:/home/admin# curl -s checkip.dyndns.org | sed -e 's/.*Current IP Address: //' -e 's/<.*$//'
54.83.27.120





root at secure:/home/admin# tcpdump -nqt -s0 -A port 5060
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 991
E...r... at ..l
..8.......D...%NOTIFY sip:83031234 at 192.168.1.2:52410;ob SIP/2.0
Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>
Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>
Max-Forwards: 69
Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
Via: SIP/2.0/UDP 127.0.0.1:5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;rport=5081;alias'
To: <sip:83031234 at 127.0.0.1:5062>
From: <sip:voicebox at voicebox.sipwise.local>;tag=4711
CSeq: 1 NOTIFY
Call-Id: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local
Event: message-summary
User-Agent: Sipwise NGCP Application Server 3.X
Content-Type: application/simple-message-summary
Content-Length: 42
Contact: <sip:ngcp-lb at 54.83.27.120:5080;ngcpct=7369703a3132372e302e302e313a35303730>

Messages-Waiting: no
Voice-Message: 0/0

IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 2
E...I3..$..o....
..8.D...
..

IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 750
E..
....".......
..8.D....B.SIP/2.0 200 OK
Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
Via: SIP/2.0/UDP 127.0.0.1:5081;rport=5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;alias'
Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>
Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>
Call-ID: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local
From: <sip:voicebox at voicebox.sipwise.local>;tag=4711
To: <sip:83031234 at 127.0.0.1>;tag=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
CSeq: 1 NOTIFY
Content-Length:  0


IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 671
E...w... at ...
..8.......D....OPTIONS sip:83031234 at 192.168.1.2:52410;ob SIP/2.0
Max-Forwards: 70
Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>
Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>
Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
From: sip:pinger at sipwise.local;tag=uloc-55734157-ea7-2-c485a0b8-4f936477
To: sip:83031234 at 192.168.1.2:52410;ob
Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1
CSeq: 1 OPTIONS
Content-Length: 0


IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 1086
E..Z. at ..#.A&....
..8.D...F..SIP/2.0 200 OK
Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>
Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>
Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1
From: <sip:pinger at sipwise.local>;tag=uloc-55734157-ea7-2-c485a0b8-4f936477
To: <sip:83031234 at 192.168.1.2>;tag=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0;ob
CSeq: 1 OPTIONS
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS
Accept: application/sdp, application/pidf+xml, application/xpidf+xml, application/simple-message-summary, message/sipfrag;version=2.0, application/im-iscomposing+xml, text/plain
Supported: replaces, 100rel, timer, norefersub
Allow-Events: presence, message-summary, refer
User-Agent: Telephone 1.1.4
Content-Length:  0





Thanxs,

Crexpedio Technical Support Team
support at crexpedio.com

-----------------------------------------
The box Said "For windows 95, 2000. XP or Better"
so I installed Linux






-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2547 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150606/653b9a6a/attachment-0001.p7s>


More information about the Spce-user mailing list