[Spce-user] No audio for Voicebox mr3.8.1

Daniel Grotti dgrotti at sipwise.com
Sat Jun 6 17:51:25 EDT 2015


What's that ! Symbol between those ips in interface field?
Looks something wrong in your network.yml ?a typo maybe?

On Jun 6, 2015 11:43 PM, Crexpedio Support Team <jesse at crexpedio.com> wrote:
>
> Thank you Daniel, 
>
> I have not modified any of these settings, below is the config: 
>
> RUN_RTPENGINE=yes 
> #LISTEN_UDP=127.0.0.1:2222 
> LISTEN_NG=127.0.0.1:2223 
> INTERFACES="ext/10.237.162.56!54.83.27.120" 
> TIMEOUT=60 
> SILENT_TIMEOUT=3600 
> PIDFILE=/var/run/ngcp-rtpengine-daemon.pid 
> FORK=yes 
> TOS=184 
> TABLE=0 
> PORT_MIN=30000 
> PORT_MAX=40000 
> B2B_URL=http://%%:8090/ 
> NO_FALLBACK=no 
> LOG_LEVEL=6 
>
>
>
> here is a tcpdump capture: (This sipwise install is running on the Amazon Cloud) I am attaching useful  network info as well. 
>
> eth0      Link encap:Ethernet  HWaddr 22:00:0b:b2:24:6d 
>           inet addr:10.237.162.56  Bcast:10.237.162.255  Mask:255.255.255.0 
>           inet6 addr: fe80::2000:bff:feb2:246d/64 Scope:Link 
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 
>           RX packets:26451 errors:0 dropped:0 overruns:0 frame:0 
>           TX packets:8955 errors:0 dropped:0 overruns:0 carrier:0 
>           collisions:0 txqueuelen:1000 
>           RX bytes:4905781 (4.6 MiB)  TX bytes:9751050 (9.2 MiB) 
>
> lo        Link encap:Local Loopback 
>           inet addr:127.0.0.1  Mask:255.0.0.0 
>           inet6 addr: ::1/128 Scope:Host 
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1 
>           RX packets:57998 errors:0 dropped:0 overruns:0 frame:0 
>           TX packets:57998 errors:0 dropped:0 overruns:0 carrier:0 
>           collisions:0 txqueuelen:0 
>           RX bytes:12892590 (12.2 MiB)  TX bytes:12892590 (12.2 MiB) 
>
> root at secure:/home/admin# curl -s checkip.dyndns.org | sed -e 's/.*Current IP Address: //' -e 's/<.*$//' 
> 54.83.27.120 
>
>
>
>
>
> root at secure:/home/admin# tcpdump -nqt -s0 -A port 5060 
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode 
> listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 
> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 991 
> E...r... at ..l 
> ..8.......D...%NOTIFY sip:83031234 at 192.168.1.2:52410;ob SIP/2.0 
> Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on> 
> Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on> 
> Max-Forwards: 69 
> Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0 
> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0 
> Via: SIP/2.0/UDP 127.0.0.1:5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;rport=5081;alias' 
> To: <sip:83031234 at 127.0.0.1:5062> 
> From: <sip:voicebox at voicebox.sipwise.local>;tag=4711 
> CSeq: 1 NOTIFY 
> Call-Id: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local 
> Event: message-summary 
> User-Agent: Sipwise NGCP Application Server 3.X 
> Content-Type: application/simple-message-summary 
> Content-Length: 42 
> Contact: <sip:ngcp-lb at 54.83.27.120:5080;ngcpct=7369703a3132372e302e302e313a35303730> 
>
> Messages-Waiting: no 
> Voice-Message: 0/0 
>
> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 2 
> E...I3..$..o.... 
> ..8.D... 
> .. 
>
> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 750 
> E.. 
> ...."....... 
> ..8.D....B.SIP/2.0 200 OK 
> Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0 
> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0 
> Via: SIP/2.0/UDP 127.0.0.1:5081;rport=5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;alias' 
> Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711> 
> Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711> 
> Call-ID: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local 
> From: <sip:voicebox at voicebox.sipwise.local>;tag=4711 
> To: <sip:83031234 at 127.0.0.1>;tag=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0 
> CSeq: 1 NOTIFY 
> Content-Length:  0 
>
>
> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 671 
> E...w... at ... 
> ..8.......D....OPTIONS sip:83031234 at 192.168.1.2:52410;ob SIP/2.0 
> Max-Forwards: 70 
> Record-Route: <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on> 
> Record-Route: <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on> 
> Via: SIP/2.0/UDP 54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0 
> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0 
> From: sip:pinger at sipwise.local;tag=uloc-55734157-ea7-2-c485a0b8-4f936477 
> To: sip:83031234 at 192.168.1.2:52410;ob 
> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1 
> CSeq: 1 OPTIONS 
> Content-Length: 0 
>
>
> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 1086 
> E..Z. at ..#.A&.... 
> ..8.D...F..SIP/2.0 200 OK 
> Via: SIP/2.0/UDP 54.83.27.120;received=54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0 
> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0 
> Record-Route: <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477> 
> Record-Route: <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477> 
> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1 
> From: <sip:pinger at sipwise.local>;tag=uloc-55734157-ea7-2-c485a0b8-4f936477 
> To: <sip:83031234 at 192.168.1.2>;tag=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0;ob 
> CSeq: 1 OPTIONS 
> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS 
> Accept: application/sdp, application/pidf+xml, application/xpidf+xml, application/simple-message-summary, message/sipfrag;version=2.0, application/im-iscomposing+xml, text/plain 
> Supported: replaces, 100rel, timer, norefersub 
> Allow-Events: presence, message-summary, refer 
> User-Agent: Telephone 1.1.4 
> Content-Length:  0 
>
>
>
>
>
> Thanxs, 
>
> Crexpedio Technical Support Team 
> support at crexpedio.com 
>
> ----------------------------------------- 
> The box Said "For windows 95, 2000. XP or Better" 
> so I installed Linux 
>
>
>
>
>
>


More information about the Spce-user mailing list