[Spce-user] No audio for Voicebox mr3.8.1

Crexpedio Support Team jesse at crexpedio.com
Sun Jun 7 08:53:19 EDT 2015


Daniel you are awesome!

That worked perfectly. Thank you so much pal, I would have never gotten that on my own.


Very much appreciated!





Thanxs,

Crexpedio Technical Support Team
support at crexpedio.com

-----------------------------------------
The box Said "For windows 95, 2000. XP or Better"
so I installed Linux





> On Jun 7, 2015, at 1:23 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
> 
> Hi,
> please set:
> 
> nat=yes
> 
> in your /etc/ngcp-config/templates/etc/asterisk/sip.conf.customtt.tt2
> 
> then apply the changes.
> 
> 
> Daniel Grotti
> VoIP Engineer
> 
> 
> Sipwise GmbH
> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com <http://www.sipwise.com/>
> 
> On 06/07/2015 01:54 AM, Crexpedio Support Team wrote:
>> I’ve been googling for the past few hours and still can’t find a
>> reasonable answer.
>> 
>> FYI I haven’t run the audio codes workaround as I did this once and
>> server crashed: 5.5.1. Audiocodes devices workaround
>> <https://www.sipwise.org/doc/mr3.8.1/spce/ar01s05.html#_audiocodes_devices_workaround <https://www.sipwise.org/doc/mr3.8.1/spce/ar01s05.html#_audiocodes_devices_workaround>>
>> 
>> Also I initially had the subscriber set to 
>> transport_protocol 	Media transport protocol
>> 
>> RTP/SAVP (encrypted SRTP)
>> 
>> But I changed this to Transparent for the sake of testing with the same
>> result.
>> 
>> I’m at a loss with ideas, any input is very much appreciated.
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> Thanxs,
>> 
>> Crexpedio Technical Support Team
>> support at crexpedio.com <mailto:support at crexpedio.com> <mailto:support at crexpedio.com <mailto:support at crexpedio.com>>
>> 
>> -----------------------------------------
>> The box Said "For windows 95, 2000. XP or Better"
>> so I installed Linux
>> 
>> 
>> 
>> 
>> 
>>> On Jun 6, 2015, at 4:08 PM, Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>> wrote:
>>> 
>>> Ah OK, its the advertised_IP.
>>> Strange, need to check then.
>>> 
>>> 
>>> On Jun 6, 2015 11:55 PM, Crexpedio Support Team <jesse at crexpedio.com <mailto:jesse at crexpedio.com>
>>> <mailto:jesse at crexpedio.com <mailto:jesse at crexpedio.com>>> wrote:
>>>> 
>>>> I haven’t modified it either so I am assuming it’s default, here is
>>>> the config
>>>> 
>>>> 
>>>> less /etc/ngcp-config/network.yml
>>>> 
>>>> ---
>>>> hosts:
>>>>  self:
>>>>    dbnode: 1
>>>>    eth0:
>>>>      advertised_ip:
>>>>        - 54.83.27.120
>>>>      ip: 10.237.162.56
>>>>      netmask: 255.255.255.0
>>>>      type:
>>>>        - web_ext
>>>>        - sip_ext
>>>>        - rtp_ext
>>>>        - web_int
>>>>        - ssh_ext
>>>>    interfaces:
>>>>      - lo
>>>>      - eth0
>>>>    lo:
>>>>      cluster_sets:
>>>>        - default
>>>>      ip: 127.0.0.1
>>>>      netmask: 255.255.255.0
>>>>      shared_ip: []
>>>>      shared_v6ip: []
>>>>      type:
>>>>        - sip_int
>>>>        - ha_int
>>>>        - aux_ext
>>>>        - ssh_ext
>>>>      v6ip: '::1'
>>>>    role:
>>>>      - proxy
>>>>      - lb
>>>>      - mgmt
>>>>      - rtp
>>>>      - db
>>>> 
>>>> 
>>>> 
>>>> Thanxs,
>>>> 
>>>> Crexpedio Technical Support Team
>>>> support at crexpedio.com <mailto:support at crexpedio.com> <mailto:support at crexpedio.com <mailto:support at crexpedio.com>>
>>>> 
>>>> -----------------------------------------
>>>> The box Said "For windows 95, 2000. XP or Better"
>>>> so I installed Linux
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>>> On Jun 6, 2015, at 3:51 PM, Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>>>> <mailto:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>> wrote:
>>>>> 
>>>>> What's that ! Symbol between those ips in interface field?
>>>>> Looks something wrong in your network.yml ?a typo maybe?
>>>>> 
>>>>> On Jun 6, 2015 11:43 PM, Crexpedio Support Team <jesse at crexpedio.com <mailto:jesse at crexpedio.com>
>>>>> <mailto:jesse at crexpedio.com <mailto:jesse at crexpedio.com>>> wrote:
>>>>>> 
>>>>>> Thank you Daniel,
>>>>>> 
>>>>>> I have not modified any of these settings, below is the config:
>>>>>> 
>>>>>> RUN_RTPENGINE=yes
>>>>>> #LISTEN_UDP=127.0.0.1:2222
>>>>>> LISTEN_NG=127.0.0.1:2223
>>>>>> INTERFACES="ext/10.237.162.56!54.83.27.120"
>>>>>> TIMEOUT=60
>>>>>> SILENT_TIMEOUT=3600
>>>>>> PIDFILE=/var/run/ngcp-rtpengine-daemon.pid
>>>>>> FORK=yes
>>>>>> TOS=184
>>>>>> TABLE=0
>>>>>> PORT_MIN=30000
>>>>>> PORT_MAX=40000
>>>>>> B2B_URL=http://%%:8090/ <http://%%:8090/>
>>>>>> NO_FALLBACK=no
>>>>>> LOG_LEVEL=6
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> here is a tcpdump capture: (This sipwise install is running on the
>>>>>> Amazon Cloud) I am attaching useful  network info as well.
>>>>>> 
>>>>>> eth0      Link encap:Ethernet  HWaddr 22:00:0b:b2:24:6d
>>>>>>           inet addr:10.237.162.56  Bcast:10.237.162.255 
>>>>>> Mask:255.255.255.0
>>>>>>           inet6 addr: fe80::2000:bff:feb2:246d/64 Scope:Link
>>>>>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>>>>           RX packets:26451 errors:0 dropped:0 overruns:0 frame:0
>>>>>>           TX packets:8955 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>           collisions:0 txqueuelen:1000
>>>>>>           RX bytes:4905781 (4.6 MiB)  TX bytes:9751050 (9.2 MiB)
>>>>>> 
>>>>>> lo        Link encap:Local Loopback
>>>>>>           inet addr:127.0.0.1  Mask:255.0.0.0
>>>>>>           inet6 addr: ::1/128 Scope:Host
>>>>>>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>>>>>>           RX packets:57998 errors:0 dropped:0 overruns:0 frame:0
>>>>>>           TX packets:57998 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>           collisions:0 txqueuelen:0
>>>>>>           RX bytes:12892590 (12.2 MiB)  TX bytes:12892590 (12.2 MiB)
>>>>>> 
>>>>>> root at secure:/home/admin# curl -s checkip.dyndns.org <http://checkip.dyndns.org/>
>>>>>> <http://checkip.dyndns.org <http://checkip.dyndns.org/>> | sed -e 's/.*Current IP Address: //'
>>>>>> -e 's/<.*$//'
>>>>>> 54.83.27.120
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> root at secure:/home/admin# tcpdump -nqt -s0 -A port 5060
>>>>>> tcpdump: verbose output suppressed, use -v or -vv for full protocol
>>>>>> decode
>>>>>> listening on eth0, link-type EN10MB (Ethernet), capture size 65535
>>>>>> bytes
>>>>>> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 991
>>>>>> E...r... at ..l
>>>>>> ..8.......D...%NOTIFY sip:83031234 at 192.168.1.2:52410;ob <sip:83031234 at 192.168.1.2:52410;ob> SIP/2.0
>>>>>> Record-Route:
>>>>>> <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>>
>>>>>> 
>>>>>> Record-Route:
>>>>>> <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711;lr=on>>
>>>>>> 
>>>>>> Max-Forwards: 69
>>>>>> Via: SIP/2.0/UDP
>>>>>> 54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>>>> Via: SIP/2.0/UDP
>>>>>> 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
>>>>>> 
>>>>>> Via: SIP/2.0/UDP
>>>>>> 127.0.0.1:5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;rport=5081;alias'
>>>>>> 
>>>>>> To: <sip:83031234 at 127.0.0.1:5062 <sip:83031234 at 127.0.0.1:5062>>
>>>>>> From: <sip:voicebox at voicebox.sipwise.local <sip:voicebox at voicebox.sipwise.local>>;tag=4711
>>>>>> CSeq: 1 NOTIFY
>>>>>> Call-Id: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local>
>>>>>> <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local>>
>>>>>> Event: message-summary
>>>>>> User-Agent: Sipwise NGCP Application Server 3.X
>>>>>> Content-Type: application/simple-message-summary
>>>>>> Content-Length: 42
>>>>>> Contact:
>>>>>> <sip:ngcp-lb at 54.83.27.120:5080;ngcpct=7369703a3132372e302e302e313a35303730 <sip:ngcp-lb at 54.83.27.120:5080;ngcpct=7369703a3132372e302e302e313a35303730>>
>>>>>> 
>>>>>> 
>>>>>> Messages-Waiting: no
>>>>>> Voice-Message: 0/0
>>>>>> 
>>>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 2
>>>>>> E...I3..$..o....
>>>>>> ..8.D...
>>>>>> ..
>>>>>> 
>>>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 750
>>>>>> E..
>>>>>> ....".......
>>>>>> ..8.D....B.SIP/2.0 200 OK
>>>>>> Via: SIP/2.0/UDP
>>>>>> 54.83.27.120;received=54.83.27.120;branch=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>>>> 
>>>>>> Via: SIP/2.0/UDP
>>>>>> 127.0.0.1:5062;rport=5062;branch=z9hG4bKdd56.61c512b4d6ef7149a2cd2848b7c2568b.0
>>>>>> 
>>>>>> Via: SIP/2.0/UDP
>>>>>> 127.0.0.1:5081;rport=5081;branch=9449a713-f186-4106-8a61-ee360e9bb942;alias'
>>>>>> 
>>>>>> Record-Route:
>>>>>> <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711 <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>>
>>>>>> 
>>>>>> Record-Route:
>>>>>> <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711 <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=4711>>
>>>>>> 
>>>>>> Call-ID: c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local>
>>>>>> <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local <mailto:c3ff4b52-1e07-476f-8f0a-9721031c02f4 at voip.sipwise.local>>
>>>>>> From: <sip:voicebox at voicebox.sipwise.local <sip:voicebox at voicebox.sipwise.local>>;tag=4711
>>>>>> To:
>>>>>> <sip:83031234 at 127.0.0.1 <sip:83031234 at 127.0.0.1>>;tag=z9hG4bKdd56.040a1d2a8ddee42f5a1c1072794d971f.0
>>>>>> 
>>>>>> CSeq: 1 NOTIFY
>>>>>> Content-Length:  0
>>>>>> 
>>>>>> 
>>>>>> IP 10.237.162.56.5060 > 186.4.24.3.35908: UDP, length 671
>>>>>> E...w... at ...
>>>>>> ..8.......D....OPTIONS sip:83031234 at 192.168.1.2:52410;ob <sip:83031234 at 192.168.1.2:52410;ob> SIP/2.0
>>>>>> Max-Forwards: 70
>>>>>> Record-Route:
>>>>>> <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on <sip:54.83.27.120:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>>
>>>>>> 
>>>>>> Record-Route:
>>>>>> <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on <sip:127.0.0.1:5060;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477;lr=on>>
>>>>>> 
>>>>>> Via: SIP/2.0/UDP
>>>>>> 54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
>>>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
>>>>>> From:
>>>>>> sip:pinger at sipwise.local;tag=uloc-55734157-ea7-2-c485a0b8-4f936477 <sip:pinger at sipwise.local;tag=uloc-55734157-ea7-2-c485a0b8-4f936477>
>>>>>> To: sip:83031234 at 192.168.1.2:52410;ob <sip:83031234 at 192.168.1.2:52410;ob>
>>>>>> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1 <mailto:098e3a55-869c8193-f349533 at 127.0.0.1>
>>>>>> <mailto:098e3a55-869c8193-f349533 at 127.0.0.1 <mailto:098e3a55-869c8193-f349533 at 127.0.0.1>>
>>>>>> CSeq: 1 OPTIONS
>>>>>> Content-Length: 0
>>>>>> 
>>>>>> 
>>>>>> IP 186.4.24.3.35908 > 10.237.162.56.5060: UDP, length 1086
>>>>>> E..Z. at ..#.A&....
>>>>>> ..8.D...F..SIP/2.0 200 OK
>>>>>> Via: SIP/2.0/UDP
>>>>>> 54.83.27.120;received=54.83.27.120;branch=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0
>>>>>> 
>>>>>> Via: SIP/2.0/UDP 127.0.0.1:5062;rport=5062;branch=0
>>>>>> Record-Route:
>>>>>> <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477 <sip:54.83.27.120:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>>
>>>>>> 
>>>>>> Record-Route:
>>>>>> <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477 <sip:127.0.0.1:5060;lr;ngcplb=yes;r2=on;socket=sip:10.237.162.56:5060;ftag=uloc-55734157-ea7-2-c485a0b8-4f936477>>
>>>>>> 
>>>>>> Call-ID: 098e3a55-869c8193-f349533 at 127.0.0.1 <mailto:098e3a55-869c8193-f349533 at 127.0.0.1>
>>>>>> <mailto:098e3a55-869c8193-f349533 at 127.0.0.1 <mailto:098e3a55-869c8193-f349533 at 127.0.0.1>>
>>>>>> From:
>>>>>> <sip:pinger at sipwise.local <sip:pinger at sipwise.local>>;tag=uloc-55734157-ea7-2-c485a0b8-4f936477
>>>>>> To:
>>>>>> <sip:83031234 at 192.168.1.2 <sip:83031234 at 192.168.1.2>>;tag=z9hG4bK3e7b.58defe284c25e2a2d119337be713d28c.0;ob
>>>>>> 
>>>>>> CSeq: 1 OPTIONS
>>>>>> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE,
>>>>>> NOTIFY, REFER, MESSAGE, OPTIONS
>>>>>> Accept: application/sdp, application/pidf+xml,
>>>>>> application/xpidf+xml, application/simple-message-summary,
>>>>>> message/sipfrag;version=2.0, application/im-iscomposing+xml,
>>>>>> text/plain
>>>>>> Supported: replaces, 100rel, timer, norefersub
>>>>>> Allow-Events: presence, message-summary, refer
>>>>>> User-Agent: Telephone 1.1.4
>>>>>> Content-Length:  0
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Thanxs,
>>>>>> 
>>>>>> Crexpedio Technical Support Team
>>>>>> support at crexpedio.com <mailto:support at crexpedio.com> <mailto:support at crexpedio.com <mailto:support at crexpedio.com>>
>>>>>> 
>>>>>> -----------------------------------------
>>>>>> The box Said "For windows 95, 2000. XP or Better"
>>>>>> so I installed Linux

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150607/62f4469f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2547 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20150607/62f4469f/attachment-0001.p7s>


More information about the Spce-user mailing list