[Spce-user] Registering to domain name

[Daniel Grotti]

Hi,
This is not possible currently.
Cause REGISTER for the peer is sent by SEMS to LB and from LB to the
provider. And SEMS does not check the outbound_socket for that peer so
it uses the default one.

We would need to improve that. I will add this in our TODO list.



--
Daniel Grotti
VoIP Engineer


Sipwise GmbH
Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com

On 11/02/2015 04:01 PM, Serge S. Yuriev wrote:
> Hi,
> 
> Missed right reply key, sorry :(
> Yes, I already set outbound_socket as required but SPCE sending register
> from default one :(
> We have pretty non-standart peering w/uplink via internal network
> 10.0.64.100 <--> 82.x.x.178
> 
> On 02/11/15 17:46, Daniel Grotti wrote:
>> Please,
>> reply to the mailing list.
>> On peer preferences you have outbound_socket, so you can use the
>> preferred socket for outbound messages.
>> Not sure if the socket is used for outbound REGISTER as well.
>>
>> Not sure if I have uderstood right what you want to achieve, though.
>>
>> -- 
>> Daniel Grotti
>> VoIP Engineer
>>
>>
>> Sipwise GmbH
>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>
>> On 11/02/2015 02:56 PM, Serge S. Yuriev wrote:
>>> Hi,
>>>
>>> Sorry for my ugly English :(
>>> I mean we try to register to provider with multiple addresses under one
>>> name.
>>> And we need to use specific interface for that.
>>>
>>> On 02/11/15 16:28, Daniel Grotti wrote:
>>>> Hi,
>>>> the SIP domain used in registration MUST be one of you SIP domain
>>>> configured in the platform.
>>>> Then you should configure you DNS in order to resolve that SIP
>>>> domain to
>>>> one of your IP listening on port 5060.
>>>>
>>>>
>>>>
>>>>
>>>> -- 
>>>> Daniel Grotti
>>>> VoIP Engineer
>>>>
>>>>
>>>> Sipwise GmbH
>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>
>>>> On 11/02/2015 02:25 PM, Serge S. Yuriev wrote:
>>>>> Hello,
>>>>>
>>>>> Our uplink ask us to register via domain name which resolves to
>>>>> multiple
>>>>> addresses.
>>>>> All these addresses exists in SPCE config with socket configured
>>>>> but not
>>>>> used in registration process.
>>>>> How we could use designated socket for this?
> 
>