[Spce-user] Registering to domain name

[Serge S. Yuriev]

Hi,

That do you think how far this is? Is it low or high priority?
If I understood correctly LB should rewirte contact and send it from 
selected socket. And it does this partially if request comes with 
localhost in contact.

On 02/11/15 18:08, Daniel Grotti wrote:
> Hi,
> This is not possible currently.
> Cause REGISTER for the peer is sent by SEMS to LB and from LB to the
> provider. And SEMS does not check the outbound_socket for that peer so
> it uses the default one.
>
> We would need to improve that. I will add this in our TODO list.
>
>
>
> --
> Daniel Grotti
> VoIP Engineer
>
>
> Sipwise GmbH
> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>
> On 11/02/2015 04:01 PM, Serge S. Yuriev wrote:
>> Hi,
>>
>> Missed right reply key, sorry :(
>> Yes, I already set outbound_socket as required but SPCE sending register
>> from default one :(
>> We have pretty non-standart peering w/uplink via internal network
>> 10.0.64.100 <--> 82.x.x.178
>>
>> On 02/11/15 17:46, Daniel Grotti wrote:
>>> Please,
>>> reply to the mailing list.
>>> On peer preferences you have outbound_socket, so you can use the
>>> preferred socket for outbound messages.
>>> Not sure if the socket is used for outbound REGISTER as well.
>>>
>>> Not sure if I have uderstood right what you want to achieve, though.
>>>
>>> -- 
>>> Daniel Grotti
>>> VoIP Engineer
>>>
>>>
>>> Sipwise GmbH
>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>
>>> On 11/02/2015 02:56 PM, Serge S. Yuriev wrote:
>>>> Hi,
>>>>
>>>> Sorry for my ugly English :(
>>>> I mean we try to register to provider with multiple addresses under one
>>>> name.
>>>> And we need to use specific interface for that.
>>>>
>>>> On 02/11/15 16:28, Daniel Grotti wrote:
>>>>> Hi,
>>>>> the SIP domain used in registration MUST be one of you SIP domain
>>>>> configured in the platform.
>>>>> Then you should configure you DNS in order to resolve that SIP
>>>>> domain to
>>>>> one of your IP listening on port 5060.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -- 
>>>>> Daniel Grotti
>>>>> VoIP Engineer
>>>>>
>>>>>
>>>>> Sipwise GmbH
>>>>> Europaring F15 | 2345 Brunn am Gebirge, Austria | www.sipwise.com
>>>>>
>>>>> On 11/02/2015 02:25 PM, Serge S. Yuriev wrote:
>>>>>> Hello,
>>>>>>
>>>>>> Our uplink ask us to register via domain name which resolves to
>>>>>> multiple
>>>>>> addresses.
>>>>>> All these addresses exists in SPCE config with socket configured
>>>>>> but not
>>>>>> used in registration process.
>>>>>> How we could use designated socket for this?

-- 
Serge S. Yuriev
Lead VoIP engineer