[Spce-user] Speeding up rate-o-mate
Marco Teixeira
admin at marcoteixeira.com
Wed Apr 20 06:59:46 EDT 2016
(...) and so, that justifies why changing it does not alter behavior.
Thank you Andreas
One more question, i'm seeing running intervals of 30 secs give or take 1
sec... If it is in a tight loop and doing 100 cdrs every 30 secs, does that
mean that the "tight loop" you mentioned pushes everyt iteration 30 secs
apart ?
Thank you
On Tue, Apr 19, 2016 at 7:36 PM, Andreas Granig <agranig at sipwise.com> wrote:
> Hi,
>
> While there are more than 5 unrated records in the cdr table, rate-o-mat
> runs in a tight loop, so changing the value doesn't affect its behavior
> at all. The loop interval really only matters once it has caught up with
> all unrated records and only a few calls are dropping in.
>
> Andreas
>
> On 04/19/2016 07:04 PM, Raúl Alexis Betancor Santana wrote:
> > On our systems, it runs exactly each 10sec, as we have not changed the
> > default value.
> >
> > ------------------------------------------------------------------------
> >
> > *De: *"Marco Teixeira" <admin at marcoteixeira.com>
> > *Para: *"Raúl Alexis Betancor Santana" <rabs at dimension-virtual.com>
> > *CC: *spce-user at lists.sipwise.com
> > *Enviados: *Martes, 19 de Abril 2016 18:10:11
> > *Asunto: *Re: [Spce-user] Speeding up rate-o-mate
> >
> > Raul,
> > See comments inline.
> >
> > On Mon, Apr 18, 2016 at 7:09 PM, Raúl Alexis Betancor Santana
> > <rabs at dimension-virtual.com <mailto:rabs at dimension-virtual.com>>
> wrote:
> >
> > That perl line says 'set loop_interval as the value of ENV var
> > RATEOMAT_LOOP_INTERVAL or 10 secs'
> >
> > Thank you.
> >
> >
> >
> > But a 'route without rate' it's not a problem of decreasing the
> > rating interval, it means you don't have rate's for that routes.
> >
> > I know. I already added the rate. I just need to catch up.
> >
> >
> >
> > Also, you don't need to restart the full server, if you whant,
> > you could just restart rate-o-mat
> >
> > It should be like that, but for some obscure reason, the that env.
> > variable is correctly set in /etc/default/ngcp-rate-o-mate to 2
> > secs, but script still does not run every 2 secs... and today i'm
> > taking a fresh look at it, and it is running every 30 secs... it
> > never was running every 10 secs... and that's even more curious.
> >
> > Can you check your "tail -f /var/log/ngcp/rate-o-mat.log" and check
> > if it runs every 10 secs, or every 30 secs ?
> >
> > Thank you
> >
> >
> >
> ------------------------------------------------------------------------
> >
> > *De: *"Marco Teixeira" <admin at marcoteixeira.com
> > <mailto:admin at marcoteixeira.com>>
> > *Para: *"Raúl Alexis Betancor Santana"
> > <rabs at dimension-virtual.com <mailto:
> rabs at dimension-virtual.com>>
> > *CC: *spce-user at lists.sipwise.com
> > <mailto:spce-user at lists.sipwise.com>
> > *Enviados: *Lunes, 18 de Abril 2016 18:38:27
> > *Asunto: *Re: [Spce-user] Speeding up rate-o-mate
> >
> > Hi Raúl,
> >
> > Yeap, i know... But what must be, must be... and now i need
> > to sacrifice call performance to bring rating up to date, as
> > it was stucked for a few days in a "route without rate"...
> > I can't reboot the server, and a simple restart of the
> > service, does not seem to work.
> >
> > Why ?
> >
> > I don't know perl... Is this line
> > my $loop_interval = $ENV{RATEOMAT_LOOP_INTERVAL} ? int
> > $ENV{RATEOMAT_LOOP_INTERVAL} : 10;
> > setting a "no less then" 10 seconds ?
> >
> > Regards
> >
> >
> >
> > On Mon, Apr 18, 2016 at 5:43 PM, Raúl Alexis Betancor
> > Santana <rabs at dimension-virtual.com
> > <mailto:rabs at dimension-virtual.com>> wrote:
> >
> > It's not a good idea to lower that value, that will
> > increase your server load.
> >
> > If it's beause you whant to 'lock' subscribers that have
> > reached their limits, better to work with the prepaid
> > engine.
> >
> >
> ------------------------------------------------------------------------
> >
> > *De: *"Marco Teixeira" <admin at marcoteixeira.com
> > <mailto:admin at marcoteixeira.com>>
> > *Para: *spce-user at lists.sipwise.com
> > <mailto:spce-user at lists.sipwise.com>
> > *Enviados: *Lunes, 18 de Abril 2016 17:15:49
> > *Asunto: *[Spce-user] Speeding up rate-o-mate
> >
> > Hi,
> >
> > Changed rateomate loop settings in config, from 10
> > to 2 sec.
> > Ngcp-cfg apply, detected and regenerated the configs
> > but still rating in 10 sec interval.
> > How can i speed it up?
> >
> > Thkx
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > <mailto:Spce-user at lists.sipwise.com>
> > https://lists.sipwise.com/listinfo/spce-user
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > <mailto:Spce-user at lists.sipwise.com>
> > https://lists.sipwise.com/listinfo/spce-user
> >
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> > https://lists.sipwise.com/listinfo/spce-user
> >
> >
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com
> > https://lists.sipwise.com/listinfo/spce-user
> >
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160420/6f7e7a7a/attachment-0001.html>
More information about the Spce-user
mailing list