[Spce-user] Cisco SPA112 Configuration for SipWise

[Skyler]

Hi Paul,

what version of SPCE are you using? I have an spa112 here and working for
me behind nat.

--Skyler

On Sep 9, 2016 8:58 AM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:

> Hello,
>
>
>
> Further to my last e-mail, I have had Cisco support on the phone and using
> remote desktop for over an hour and they could not solve the problem!
>
>
>
> I notice that the SPA112 registers as follows:
> Cisco/SPA112-1.4.1(002) sip:xxxxxxxxxxxx at 192.168.1.60:5060
>
>
>
>
>
> Is the fact that it is registering with its LAN IP significant as I
> believe it to be? When I assign the same account to a Zoiper softphone, it
> registers with the correct external IP address. I am going to experiment
> with the SPA112 sitting directly on a public IP address and see if it
> registers with SipWise correctly.
>
>
>
> Raúl - Gemma will be in touch with those login details soon. I am hoping
> to at least get a test account running so that you can see our
> configuration and determine how much support we need!
>
>
>
> Very best of wishes,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T:   *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Paul Smith <paul.smith at daneco.co.uk>
> *Sent:* Thu 08-09-2016 19:19
> *Subject:* [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Spce-user at lists.sipwise.com;
>
> Dear All,
>
>
>
> My apologies if this subject has already been covered, but I wondered if
> someone could point me in the right direction for a working configuration
> on the Cisco SPA112?
>
>
>
> I can place outbound calls fine, but inbound are a no-go. I suspect this
> is because the SPA112 is registering with its internal IP address rather
> than that of the WAN connection. I have enabled NAT mapping and keep alive
> but this hasn't made a difference.
>
>
>
> Any help would be greatly appreciated.
>
>
>
> Thank you,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T:   *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
> _______________________________________________
>  Spce-user mailing list
>  Spce-user at lists.sipwise.com
>  https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160909/c171b71b/attachment-0001.html>