[Spce-user] Cisco SPA112 Configuration for SipWise

[Skyler]

Hi Paul,

I run mr3.8 but ive done some custom config too. i actually think the
problem could be spce configuration or your router, as this behavior
indicates a fix_nated_contact() on Register issue more than your device.

Do you have SIP-ALG enabled on your router the ata is behind? Usually thus
setting tries to rewrite sip messages but in my experience it does not
rewrite sdp, so maybe this is the problem.

--Skyler

On Sep 9, 2016 5:41 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:

> Hello Skyler,
>
> Thank you for your reply. I'm running mr4.4.1 and have tried different
> combinations of settings but without joy. Would you mind sending me a
> generic copy of your configuration file so I can give it a try? I
> understand if you'd rather not.
>
> I have updated the unit to the latest version and tried the different NAT
> options. The unit does register and can make outbound calls but inbound
> aren't working. SipWise is trying to route them to the private IP by the
> look of things.
>
> Thank you again - any help is greatly appreciated.
>
> Best regards,
>
> Paul.
>
> Sent from a DANECO device.
>
> On 9 Sep 2016, at 11:00 pm, Skyler <skchopperguy at gmail.com> wrote:
>
> Hi Paul,
>
> what version of SPCE are you using? I have an spa112 here and working for
> me behind nat.
>
> --Skyler
>
> On Sep 9, 2016 8:58 AM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
>> Hello,
>>
>>
>>
>> Further to my last e-mail, I have had Cisco support on the phone and
>> using remote desktop for over an hour and they could not solve the problem!
>>
>>
>>
>> I notice that the SPA112 registers as follows:
>> Cisco/SPA112-1.4.1(002) sip:xxxxxxxxxxxx at 192.168.1.60:5060
>>
>>
>>
>>
>>
>> Is the fact that it is registering with its LAN IP significant as I
>> believe it to be? When I assign the same account to a Zoiper softphone, it
>> registers with the correct external IP address. I am going to experiment
>> with the SPA112 sitting directly on a public IP address and see if it
>> registers with SipWise correctly.
>>
>>
>>
>> Raúl - Gemma will be in touch with those login details soon. I am hoping
>> to at least get a test account running so that you can see our
>> configuration and determine how much support we need!
>>
>>
>>
>> Very best of wishes,
>>
>>
>>
>> Paul.
>>
>>
>>
>> --
>>
>>
>> *Paul R. Smith B.Sc. (Hons.)*
>>
>> Managing Director
>>
>> Data Network Consultants Limited
>>
>>
>>
>> *T:   *01207 750 550
>>
>> *W: *www.daneco.co.uk
>>
>>
>>
>> [image: DANECO Logo]
>>
>>
>>
>> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
>> Network Specialists.*
>>
>>
>>
>> DANECO is a trading name of Data Network Consultants Limited.
>>
>>
>>
>> Company Reg. No: 06769055
>> Registered in England and Wales.
>>
>>
>>
>> This email and its contents are confidential and intended for the
>> addressee only. It may not be disclosed to or used by anyone else nor may
>> it be copied in any way. Data Network Consultants Limited nor the sender
>> accepts any responsibility for viruses and it is the addressee's
>> responsibility to check attachments if any. Any opinions expressed in this
>> email are those of the sender and not necessarily those of Data Network
>> Consultants Limited. If received in error please contact the sender to
>> advise then delete from your system.
>>
>>
>>
>>
>>
>>
>> -----Original message-----
>> *From:* Paul Smith <paul.smith at daneco.co.uk>
>> *Sent:* Thu 08-09-2016 19:19
>> *Subject:* [Spce-user] Cisco SPA112 Configuration for SipWise
>> *To:* Spce-user at lists.sipwise.com;
>>
>> Dear All,
>>
>>
>>
>> My apologies if this subject has already been covered, but I wondered if
>> someone could point me in the right direction for a working configuration
>> on the Cisco SPA112?
>>
>>
>>
>> I can place outbound calls fine, but inbound are a no-go. I suspect this
>> is because the SPA112 is registering with its internal IP address rather
>> than that of the WAN connection. I have enabled NAT mapping and keep alive
>> but this hasn't made a difference.
>>
>>
>>
>> Any help would be greatly appreciated.
>>
>>
>>
>> Thank you,
>>
>>
>>
>> Paul.
>>
>>
>>
>> --
>>
>>
>> *Paul R. Smith B.Sc. (Hons.)*
>>
>> Managing Director
>>
>> Data Network Consultants Limited
>>
>>
>>
>> *T:   *01207 750 550
>>
>> *W: *www.daneco.co.uk
>>
>>
>>
>> [image: DANECO Logo]
>>
>>
>>
>> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
>> Network Specialists.*
>>
>>
>>
>> DANECO is a trading name of Data Network Consultants Limited.
>>
>>
>>
>> Company Reg. No: 06769055
>> Registered in England and Wales.
>>
>>
>>
>> This email and its contents are confidential and intended for the
>> addressee only. It may not be disclosed to or used by anyone else nor may
>> it be copied in any way. Data Network Consultants Limited nor the sender
>> accepts any responsibility for viruses and it is the addressee's
>> responsibility to check attachments if any. Any opinions expressed in this
>> email are those of the sender and not necessarily those of Data Network
>> Consultants Limited. If received in error please contact the sender to
>> advise then delete from your system.
>>
>>
>>
>> _______________________________________________
>>  Spce-user mailing list
>>  Spce-user at lists.sipwise.com
>>  https://lists.sipwise.com/listinfo/spce-user
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160909/1d43ff9c/attachment-0001.html>