[Spce-user] Spce-user Archives

[Colton Conor]

Looks like the ngcp-panel is not up and running. All I did was launch the
AMI on amazon. What am I missing, or an the instructions incomplete? Here
is the output of commands. The only thing I didn't do per the instructions
at https://www.sipwise.org/doc/mr5.2.1/spce/ar01s03.html#
_using_a_pre_installed_virtual_machine was

Don’t forget to add the Advertised IP for kamailio lb instance, since it’s
required by the Amazon EC2 network infrastructure:

ngcp-network --set-interface=eth0 --advertised-ip=<your_public_amazon_ip>

Since I can't run the ngcp-command as it appears not to be installed by
default on the AMI provided?

Here are the command I ran:

admin at ip-172-31-5-244:~$ /etc/init.d/ngcp-panel status
chown: changing ownership of ‘/var/run/fastcgi’: Operation not permitted
[info] Status of NGCP-Panel Webapp.
[FAIL] ngcp-panel is not running ... failed!
admin at ip-172-31-5-244:~$

root at ip-172-31-5-244:~# which ngcp-network
/usr/sbin/ngcp-network

root at ip-172-31-5-244:~# dpkg -S /usr/sbin/ngcp-network
ngcp-ngcpcfg: /usr/sbin/ngcp-network

root at ip-172-31-5-244:~# dpkg -l ngcp-ngcpcfg | grep '^ii'
ii  ngcp-ngcpcfg   5.2.1.1+0~mr5.2.1.1 all          central and templated
based Configuration Management System for NGCP platforms





On Fri, Apr 28, 2017 at 11:55 AM, Alex Lutay <alutay at sipwise.com> wrote:

> Hi,
>
> As for me http://lists.sipwise.com/pipermail/spce-user/ works perfectly.
> Can you please describe your issue in more details?
> What is the error you have here?
>
> As for "502 Bad Gateway error" please check ngcp-panel is up and
> running: /etc/init.d/ngcp-panel status
>
> "ngcp-network" command must be installed during the installation,
> it is a part of package 'ngcp-ngcpcfg', from my side:
> > root at spce:~# which ngcp-network
> > /usr/sbin/ngcp-network
>
> > root at spce:~# dpkg -S /usr/sbin/ngcp-network
> > ngcp-ngcpcfg: /usr/sbin/ngcp-network
>
> > root at spce:~# dpkg -l ngcp-ngcpcfg | grep '^ii'
> > ii  ngcp-ngcpcfg   5.2.1.1+0~mr5.2.1.1 all          central and
> templated based Configuration Management System for NGCP platforms
>
> Feel free to ask more questions if you have any issues there!
>
> On 04/28/2017 03:54 PM, Colton Conor wrote:
> > Is there a reason why the Spce-user Archives
> > at http://lists.sipwise.com/pipermail/spce-user/ does not work?
> >
> > I am trying to install SIPWISE CE on AWS. I followed the instructions
> > https://www.sipwise.org/doc/mr5.2.1/spce/ar01s03.html#_
> using_a_pre_installed_virtual_machine
> >
> > but there is no ngcp-network --set-interface=eth0 --advertised-ip=
> command
> >
> >
> > instructions When I go to the First step should be logging in to the
> > Admin panel (username /administrator/, password /administrator/) and
> > changing the default password: https://$DNS:1443/login/admin
> > <https://%24dns:1443/login/admin>
> >
> > I am getting a 502 Bad Gateway error.
> >
> >
> > It looks like this issue has been asked and answered on the list before
> > by looking at Google, but I can access those posts replies as the
> > Archives doesn't seem to work? Help.
>
> --
> Alex Lutay
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20170430/d2c46248/attachment-0001.html>