Koot Pienaar koot at ntelecom.co.za
Mon Aug 21 16:06:41 EDT 2017

Good to hear.




Koot Pienaar


From: MUNDOTEL [mailto:mundial3000 at gmail.com] 
Sent: 21 August 2017 05:59 PM
To: Koot Pienaar
Cc: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] INBOUND-SETUP


koot,  is working now,  is like you say,  I clean all rules and only put the IP=     is from my  did coming and that  set, evrithing working,  thank so much,  I got to other step in couple hours   thankyou


On Mon, Aug 21, 2017 at 11:07 AM, Koot Pienaar <koot at ntelecom.co.za> wrote:

Right so calls are coming in on 13476895208 <tel:(347)%20689-5208>  but then your rewrite rules are rewriting the callee to 3476895208 <tel:(347)%20689-5208>  ie it strips the leading 1.


You have no sip subscriber configured with this as its e164 number. So either you have to correct your sip subscriber E164 number to 13476895208 <tel:(347)%20689-5208>  or remove the rewrite rule so it does not rewrite it.


Post config of your subscriber here. And please cc the mailing list.


Also read the Documentation






Koot Pienaar

From: MUNDOTEL [mailto:mundial3000 at gmail.com] 
Sent: 21 August 2017 04:52 PM
To: Koot Pienaar
Subject: Re: [Spce-user] INBOUND-SETUP


ok I capture,  but not understand nothing ,, I send attachee 


On Mon, Aug 21, 2017 at 2:40 AM, Koot Pienaar <koot at ntelecom.co.za> wrote:



Like i said during our discussions. If you use from_domain in your peering rules you have to put in the domain/ip the call is coming from into the peering rules pattern.


Sounds like you want to match the did, like in freepbx. Then you would have tou se the from user option


Please tail -f /var/log/ngcp/kamailio-proxy.log and make the call. The nyou will see it will probably say it is not matching your inbound peering rules.




Koot Pienaar


From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of MUNDOTEL
Sent: 18 August 2017 09:57 PM
To: spce-user at lists.sipwise.com
Subject: [Spce-user] INBOUND-SETUP


hi, I tray couple setup, but nothing working, in peering rules i use   from domain,  and in pattern  I put  

   ^1([1-9][0-9]+)$         but  is not working

this is the DID I tray to  setup   13053400398 <tel:(305)%20340-0398>  , I only redirect to the ip address of the spce, make  peering server and make peereng rule, if I dial from other extension, that number ringing, but wen dial from outside nothing happen

can someboddy make  diagrama setup and send to me ,so I can see exactly how to do that?



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20170821/2bf23d1c/attachment-0001.html>

More information about the Spce-user mailing list