[Spce-user] INBOUND-SETUP

[MUNDOTEL]

koot,  is working now,  is like you say,  I clean all rules and only put
the IP=64.156.174.74     is from my  did coming and that  set, evrithing
working,  thank so much,  I got to other step in couple hours   thankyou

On Mon, Aug 21, 2017 at 11:07 AM, Koot Pienaar <koot at ntelecom.co.za> wrote:

> Right so calls are coming in on 13476895208 <(347)%20689-5208> but then
> your rewrite rules are rewriting the callee to 3476895208
> <(347)%20689-5208> ie it strips the leading 1.
>
>
>
> You have no sip subscriber configured with this as its e164 number. So
> either you have to correct your sip subscriber E164 number to 13476895208
> <(347)%20689-5208> or remove the rewrite rule so it does not rewrite it.
>
>
>
> Post config of your subscriber here. And please cc the mailing list.
>
>
>
> Also read the Documentation
>
> https://www.sipwise.org/doc/mr4.5.5/spce/ar01s05.html#dialplans
>
>
>
> regards
>
>
>
>
>
> Koot Pienaar
>
> *From:* MUNDOTEL [mailto:mundial3000 at gmail.com]
> *Sent:* 21 August 2017 04:52 PM
> *To:* Koot Pienaar
> *Subject:* Re: [Spce-user] INBOUND-SETUP
>
>
>
> ok I capture,  but not understand nothing ,, I send attachee
>
>
>
> On Mon, Aug 21, 2017 at 2:40 AM, Koot Pienaar <koot at ntelecom.co.za> wrote:
>
> HI
>
>
>
> Like i said during our discussions. If you use from_domain in your peering
> rules you have to put in the domain/ip the call is coming from into the
> peering rules pattern.
>
>
>
> Sounds like you want to match the did, like in freepbx. Then you would
> have tou se the from user option
>
>
>
> Please tail -f /var/log/ngcp/kamailio-proxy.log and make the call. The
> nyou will see it will probably say it is not matching your inbound peering
> rules.
>
>
>
>
>
>
>
> Koot Pienaar
>
>
>
> *From:* Spce-user [mailto:spce-user-bounces at lists.sipwise.com] *On Behalf
> Of *MUNDOTEL
> *Sent:* 18 August 2017 09:57 PM
> *To:* spce-user at lists.sipwise.com
> *Subject:* [Spce-user] INBOUND-SETUP
>
>
>
> hi, I tray couple setup, but nothing working, in peering rules i use
> from domain,  and in pattern  I put
>
>    ^1([1-9][0-9]+)$         but  is not working
>
> this is the DID I tray to  setup   13053400398 <(305)%20340-0398> , I
> only redirect to the ip address of the spce, make  peering server and make
> peereng rule, if I dial from other extension, that number ringing, but wen
> dial from outside nothing happen
>
> can someboddy make  diagrama setup and send to me ,so I can see exactly
> how to do that?
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20170821/f56f5d10/attachment-0001.html>