[Spce-user] Enable G729 codec

[Jay Autar]

Hi Walter,


Thanks for your reply! I think you are mentioning the g729 codec within the PBX of sipwise. Correct me if I wrong.


My problem is the g729 codec between trunk of the SIP provider.

My SDP filter settings are:


sdp_filter:
      codecs: g729,PCMA,PCMU,telephone-event
      enable: 'yes'
      mode: whitelist


But when I make a call to our sip provider I am getting a Unsuported media SIP message back from the sip provider.


I did a troubleshooting with my sip provider and he said that I was missing the g729 codec.


Do you have a solution for this problem?



Sent from Outlook<http://aka.ms/weboutlook>
________________________________
From: Walter Klomp <walter at myrepublic.net>
Sent: Sunday, August 20, 2017 2:42:07 AM
To: Jay Autar
Cc: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Enable G729 codec

Yes it is enabled by default but if you are wondering about announcements or core services like voicemail supporting g729, that will not happen due to licensing requirements.

But by default if sender and receiver supports it, spce will pass through anything.

Yours sincerely,
Walter

On 18 Aug 2017, at 11:28 PM, Jay Autar <jaykautar at outlook.com<mailto:jaykautar at outlook.com>> wrote:


Dear,


Is it possible to enable G729 codec support on the sipwise installation. How can this be enabled?


I changed in

/etc/ngcp-config/config.yml

the sdp_filter setting but is not working.

Is the G729 codec default available in the sipwise installation?


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20170822/f2a55bfc/attachment-0001.html>