[Spce-user] Backup... Second try

Walter Klomp walter at myrepublic.net
Wed Nov 29 20:30:51 EST 2017


Nope. I actually had to explicitly switch it off because it cleans up too much too early. 

Yours sincerely,
Walter

> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> Hi Walter,
> 
> Did you have to do anything for it to work?
> 
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
> I can tell you that on my 3.8 and 4.5 installations backup “just works”. So it is included afaik. 
> 
> Yours sincerely,
> Walter
> 
>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>> 
>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>> 
>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>> Hi,
>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>> 
>>> Cheers,
>>> 
>>>  -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>> 
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>> 
>>>> Uh... no.  Not according to the handbook:
>>>> 
>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>> 
>>>> 13.1.2 The built-in backup solution
>>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>> 
>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>> 
>>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>>> Hi Matt, 
>>>>> 
>>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>>> 
>>>>> Saludos,
>>>>> Robert Cuaresma
>>>>> 
>>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribió:
>>>>>> Sending this out again.  Anyone?
>>>>>> 
>>>>>> ---
>>>>>> 
>>>>>> Hello All,
>>>>>> 
>>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>>> 
>>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>>> 
>>>>>> Thank you all!
>>>>>> 
>>>>>> 
>>>>>> ---My backuptools config section of config.yml---
>>>>>> backuptools:
>>>>>>   cdrexport_backup:
>>>>>>     enable: 'yes'
>>>>>>   etc_backup:
>>>>>>     enable: 'yes'
>>>>>>   mail:
>>>>>>     address: winwithschwinn at gmail.com
>>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>>     send_errors: 'yes'
>>>>>>     send_log: 'yes'
>>>>>>   mysql_backup:
>>>>>>     enable: 'yes'
>>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>>   rotate_days: 7
>>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>>> ------
>>>>>> 
>>>>>> 
>>>>>>  _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> 
>>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: Alex Lutay <alutay at sipwise.com>
>>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>>> Cc: 
>>>>> Bcc: 
>>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>>> Hi,
>>>>> 
>>>>> As Andrew Pogrebennyk wrote in a thread,
>>>>> backuptools is for PRO/Carrier only.
>>>>> 
>>>>> This is why CE validation doesn't like it.
>>>>> 
>>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>>> >
>>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>>> 
>>>>> --
>>>>> Alex Lutay
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Enjoy the day!
>>>> Matt Schwinn
>>>> TCG Technologies LLC 
>>>>       and
>>>> Company B
>>>> 209-202-3329
>>>> www.TCGTechLLC.com
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>> 
>> 
>> 
>> -- 
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC 
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/97310803/attachment-0001.html>


More information about the Spce-user mailing list