[Spce-user] Backup... Second try

Matt Schwinn winwithschwinn at gmail.com
Wed Nov 29 20:53:18 EST 2017


How strange.  I didn't even have the backuptools section in my config.yml
file.

On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net> wrote:

> Nope. I actually had to explicitly switch it off because it cleans up too
> much too early.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>
> Hi Walter,
>
> Did you have to do anything for it to work?
>
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>
> I can tell you that on my 3.8 and 4.5 installations backup “just works”.
> So it is included afaik.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com>
> wrote:
>
> Again, the user manual states that it 'is' included in CE.  Can we get
> clarification on this please?
>
> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com>
> wrote:
>
>> Hi,
>> I confirm, backup tool are *not* available for CE. Only on commercial
>> version.
>> Sorry for my previous suggestion, where I supposed backup was supported
>> CE.
>>
>> Cheers,
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>
>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>
>> Uh... no.  Not according to the handbook:
>>
>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>
>> 13.1.2 The built-in backup solution
>> The sip:provider CE comes with an easy-to-use solution that creates
>> everyday backups of the most important data:
>>
>> If what Alex says is true then this needs to be removed from the handbook.
>>
>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
>> wrote:
>>
>>> Hi Matt,
>>>
>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>>> from Alex Lutay that he confirm that.
>>>
>>> Saludos,
>>> Robert Cuaresma
>>>
>>> El 22/11/2017 a las 2:20, Matt Schwinn escribió:
>>>
>>> Sending this out again.  Anyone?
>>>
>>> ---
>>>
>>> Hello All,
>>>
>>> A couple of things that may have already been discussed.  I am running
>>> CE mr4.5.4 and have enabled the automatic backup feature as described in
>>> the handbook and it seems to not be working.  Can someone give me some
>>> advice.  The entire backuptools section was missing from my config.yml file
>>> so I added it manually.  I'll copy what I have below so you can take a
>>> look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after
>>> making my change but it does not seem to be working as described.
>>>
>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>>> overview'" which is actually located in section B.1.4.
>>>
>>> Thank you all!
>>>
>>>
>>> ---My backuptools config section of config.yml---
>>> backuptools:
>>>   cdrexport_backup:
>>>     enable: 'yes'
>>>   etc_backup:
>>>     enable: 'yes'
>>>   mail:
>>>     address: winwithschwinn at gmail.com
>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>     send_errors: 'yes'
>>>     send_log: 'yes'
>>>   mysql_backup:
>>>     enable: 'yes'
>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>   rotate_days: 7
>>>   storage_dir: '/var/backup/ngcp_backup'
>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>> ------
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Alex Lutay <alutay at sipwise.com>
>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>> Cc:
>>> Bcc:
>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>> Subject: Re: [Spce-user] Backup is not integrated.
>>> Hi,
>>>
>>> As Andrew Pogrebennyk wrote in a thread,
>>> backuptools is for PRO/Carrier only.
>>>
>>> This is why CE validation doesn't like it.
>>>
>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>> > I have same issue, If I add the section according to the documentation
>>> and execute: ngcpcfg --validate check
>>> >
>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>>> /etc/ngcp-config/config.yml
>>> > /etc/ngcp-config/config.yml#0: INVALID
>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>
>>> --
>>> Alex Lutay
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>
>>
>> --
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/01c75fb1/attachment-0001.html>


More information about the Spce-user mailing list