[Spce-user] How to add thousands of Alias Numbers to a subscriber

[Jon Bonilla (Manwe)]

El Wed, 26 Sep 2018 06:29:45 +0000
Kevin Boddy <kevin.boddy at firstnet.co.za> escribió:

> Hi,
> 
> I have enabled peer to peer calling and tried setting up my PBX as a peer but
> it wanted to route the inbound call out the same peer it received it on for
> some reason. Will try again though.


Not the right thing to do. The pbx should be a subscriber and the aliases set
via API.


> 
> Thanks
> 
> Kevin Boddy
> ISP Technical
> 
> FirstNet Technology Services
> 
> Tel: +27318180800 | Direct: +27315736288 | Mobile: +27832661735 | Fax:
> +27318180801 Address: 4 Sunbury Crescent, Sunbury Office Park, La Lucia
> Ridge, 4019 | Postal Address: P O Box 703, Umhlanga Rocks, Durban, 4320
> Website: http://www.firstnet.co.za Disclaimer:
> http://www.firstnet.co.za/disclaimer.htmFrom: Walter Klomp
> <walter at myrepublic.net> Sent: Wednesday, 26 September 2018 1:38 AM To: Kevin
> Masse <kmasse at questblue.com> Cc: Kevin Boddy <kevin.boddy at firstnet.co.za>;
> spce-user at lists.sipwise.com Subject: Re: [Spce-user] How to add thousands of
> Alias Numbers to a subscriber
> 
> Hi,
> 
> I would set up the PBX also as a peer.  You can then use regex rules to
> route... (note you’d have to enable peer to peer calls in the preferences of
> inbound and outbound peers)
> 
> Your upstream provider should be a peer in any case. And yes, you have to use
> the api to set up aliases if you want to use a script. Yours sincerely,
> 
> Walter Klomp
> 
> 
> On 26 Sep 2018, at 04:51, Kevin Masse
> <kmasse at questblue.com<mailto:kmasse at questblue.com>> wrote: Hello Kevin,
> 
> With this large number of entries I would most certainly use the API to add
> them.  Are you using the built in API?
> 
> Thank you
> Kevin
> 
> 
> Kevin Masse QuestBlue Systems, Inc.
> 919 443 1617  Ext 5352 FAX 888 548 6593
> 1947 Evans Rd, Cary NC 27513
> www.questblue.com<http://www.questblue.com>
> 
> 
> 
> From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of
> Kevin Boddy Sent: Tuesday, September 25, 2018 2:24 PM
> To: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>
> Subject: [Spce-user] How to add thousands of Alias Numbers to a subscriber
> 
> Hi,
> 
> I’ve got a test setup of Sipwise CE mr 6.4.1 connected to my upstream voip
> provider on one interface and my backend PBX on another network interface. I
> created the PBX as a subscriber and can get inbound calls working by adding
> in the Primary Number  and Alias Numbers fields.
> 
> I’ve DID number ranges, non-sequential numbers in total adding up to about
> 50000 numbers. How would I add those the Alias Numbers?
> 
> Normally on our SBC’s you can add a regular expression for the number range
> but on Sipwise all I can do is add the numbers in the format <cc> <ac> <upn>.
> The UPN has to have at least three digits otherwise it doesn’t work so I can
> cover some of the number ranges like this but this still leaves me with
> thousands of numbers to add to this subscriber.
> 
> Is there a better way to achieve this?
> 
> Thanks
> Kevin
> 
> 
> 
> 
> Kevin Boddy
> ISP Technical
> <image001.png><http://www.firstnet.co.za>
> 
> 
> Tel: +27318180800 | Direct: +27315736288 | Mobile: +27832661735 | Fax:
> +27318180801 | Email:
> kevin.boddy at firstnet.co.za<mailto:kevin.boddy at firstnet.co.za> Address: 4
> Sunbury Crescent, Sunbury Office Park, La Lucia Ridge, 4019 | Postal Address:
> P O Box 703, Umhlanga Rocks, 4320 Website:
> http://www.firstnet.co.za<http://www.firstnet.co.za> Disclaimer:
> http://www.firstnet.co.za/disclaimer.htm<http://www.firstnet.co.za/disclaimer.htm>
> 
> This email has been scanned for viruses and malware, and automatically
> archived by Mimecast SA (Pty) Ltd, an innovator in Software as a Service
> (SaaS) for business. Mimecast Unified Email Management (UEM) offers email
> continuity, security, archiving and compliance with all current legislation.
> To find out more contact FirstNet.
> _______________________________________________ Spce-user mailing list
> Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
> https://lists.sipwise.com/listinfo/spce-user<https://lists.sipwise.com/listinfo/spce-user>
> 
> The contents of this email and any attachments are confidential and may also
> be privileged. You must not disseminate the contents of this email and any
> attachments without permission of the sender. If you have received this email
> by mistake, please delete all copies and inform the sender immediately. You
> may refer to our company's Privacy Policy
> here<https://myrepublic.net/sg/legal/terms-of-use-policies/privacy-policy/>.
> 


-- 
https://pekepbx.com
https://www.issabel.com/multitenant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20180926/d0e06cde/attachment-0001.sig>