[Spce-user] External peers registration
rleone.soluzioni at libero.it
rleone.soluzioni at libero.it
Fri Feb 15 09:12:35 EST 2019
Hi,
in /etc/ngcp-sems/etc/reg_agent.conf:
# IMPORTANT:
# Only set "domain", "user" and "pwd", and leave "proxy" and "contact" EXACTLY
# as is to make outbound registrations to work.
#
# Note that the "contact" parameter is specific to the Sipwise SPCE and does
# not yet exist in the official sems.
domain=xxx.xxx.xxx.xxx
user=uservoip
pwd=pwdvoip
proxy=sip:127.0.0.1:5060
contact=sip:xxx.xxx.xxx.xxx:5060
#domain1=<your peer realm>
#user1=<your peer user>
#pwd1=<your peer password>
#proxy1=sip:127.0.0.1:5060
#contact1=sip:xxx.xxx.xxx.xxx:5060
#domain2=<your peer realm>
#user2=<your peer user>
#pwd2=<your peer password>
#proxy2=sip:127.0.0.1:5060
#contact2=sip:xxx.xxx.xxx.xxx:5060
# Up to 50 registrations are possible.
tail -f /etc/ngcp-sems/etc/reg_agent.conf
...
[#7f5cd6018700/5154] [update_uac_reply, trans_layer.cpp:2052] INFO: disable blacklisting: remote UA (127.0.0.1/5060) did reply
[#7f5cd6018700] [update_uac_reply, trans_layer.cpp:2052] INFO: disable blacklisting: remote UA (127.0.0.1/5060) did reply
> Il 15 febbraio 2019 alle 15.03 Daniel Grotti <dgrotti at sipwise.com> ha scritto:
>
> Hi,
> the second one is the correct one.
> Try to use the second one, and then apply.
> After that, what do you have in / etc/ngcp-sems/etc/reg_agent.conf ?
>
>
>
>
> --
> Daniel Grotti
>
> Head of Customer Support Sipwise GmbH
> e: dgrotti at sipwise.com mailto:dgrotti at sipwise.com Europaring F15
> t: +43(0)130120332 A-2345 Brunn Am Gebirge
> w: http://www.sipwise.com FN: 305595f FG: LG Wiener Neustadt
>
> On 2/15/19 3:01 PM, rleone.soluzioni at libero.it mailto:rleone.soluzioni at libero.it wrote:
>
> > >
> > Hi,
> >
> > Has anyone had the same issues with logging to external peers?
> >
> >
> > if in /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2
> >
> > domain=xxx.xxx.xxx.xxx
> > user=uservoip
> > pwd=passvoip
> > #proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
> > [% IF sip_adv_ips.size -%]
> > #contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
> > [% ELSE -%]
> > #contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
> > [% END -%]
> >
> > in /var/log/ngcp/sems.log :
> >
> > [#7fe28c899740] [main, sems.cpp:634] INFO: SEMS 1.6.0 (x86_64/linux) started
> >
> > [#7fe27ae98700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> >
> > [#7f404838b700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f404828a700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f4048189700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f401bfff700] [run, tcp_trsp.cpp:807] INFO: Started SIP server TCP transport on 127.0.0.1:5080[
> >
> > [#7fc2a9bdd700] [sendto, udp_trsp.cpp:179] ERROR: sendto(14;xxx.xxx.xxx.xxx:5060): Invalid argument
> >
> > [#7fc2a9bdd700] [send_request, trans_layer.cpp:1311] ERROR: Error from transport layer
> >
> > otherwise
> >
> > in /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2 :
> >
> > domain=xxx.xxx.xxx.xxx
> > user=uservoip
> > pwd=passvoip
> > proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
> > [% IF sip_adv_ips.size -%]
> > contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
> > [% ELSE -%]
> > contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
> > [% END -%]
> >
> > in /var/log/ngcp/sems.log :
> >
> > [#7f4055ecf740] [XMLRPC2DIServer, XMLRPC2DI.cpp:384] INFO: IP = 127.0.0.1 port = 8090
> > [#7f4055ecf740] [loadFile, AmConfigReader.cpp:82] WARNING: could not open configuration file '/etc/ngcp-sems/etc/cc_call_timer.conf': No such file or directory
> > [#7f4055ecf740] [onLoad, CallTimer.cpp:81] INFO: cc_call_timerconfiguration file (/etc/ngcp-sems/etc/cc_call_timer.conf) not found, assuming default configuration is fine
> > [#7f4055ecf740] [initMonitoring, AmSessionContainer.cpp:119] INFO: monitoring module not loaded, monitoring disabled
> > [#7f4055ecf740] [main, sems.cpp:634] INFO: SEMS 1.6.0 (x86_64/linux) started
> > [#7f404848c700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f404838b700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f404828a700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f4048189700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP transport on 127.0.0.1:5080
> > [#7f401bfff700] [run, tcp_trsp.cpp:807] INFO: Started SIP server TCP transport on 127.0.0.1:5080[
> >
> > #7f67aa84a700/32199] [update_uac_reply, trans_layer.cpp:2052] INFO: disable blacklisting: remote UA (127.0.0.1/5060) did reply
> >
> > [#7f67aa749700] [update_uac_reply, trans_layer.cpp:2052] INFO: disable blacklisting: remote UA (127.0.0.1/5060) did reply
> >
> >
> > with both configurations the registration fails
> >
> > version in use 6.5.3
> > with previous 5.x is ok
> >
> >
> > _______________________________________________
> > Spce-user mailing list
> > Spce-user at lists.sipwise.com mailto:Spce-user at lists.sipwise.com
> > https://lists.sipwise.com/listinfo/spce-user
> >
> > >
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20190215/a9488259/attachment-0001.html>
More information about the Spce-user
mailing list