[Spce-user] External peers registration
Daniel Grotti
dgrotti at sipwise.com
Fri Feb 15 09:18:21 EST 2019
Have you configured also the Remote authentication section in the peer's
preferences?
Have you set peer_auth_register there?
Please make sure you have done all this and then:
- run "sngrep"
- restart sbc
you should see a REGISTER message going out to your provider.
--
Daniel Grotti
Head of Customer Support Sipwise GmbH
e: dgrotti at sipwise.com Europaring F15
t: +43(0)130120332 A-2345 Brunn Am Gebirge
w: www.sipwise.com FN: 305595f FG: LG Wiener Neustadt
On 2/15/19 3:12 PM, rleone.soluzioni at libero.it wrote:
>
> Hi,
>
> in /etc/ngcp-sems/etc/reg_agent.conf:
>
>
> # IMPORTANT:
> # Only set "domain", "user" and "pwd", and leave "proxy" and "contact"
> EXACTLY
> # as is to make outbound registrations to work.
> #
> # Note that the "contact" parameter is specific to the Sipwise SPCE
> and does
> # not yet exist in the official sems.
>
> domain=xxx.xxx.xxx.xxx
> user=uservoip
> pwd=pwdvoip
> proxy=sip:127.0.0.1:5060
> contact=sip:xxx.xxx.xxx.xxx:5060
>
> #domain1=<your peer realm>
> #user1=<your peer user>
> #pwd1=<your peer password>
> #proxy1=sip:127.0.0.1:5060
> #contact1=sip:xxx.xxx.xxx.xxx:5060
>
>
> #domain2=<your peer realm>
> #user2=<your peer user>
> #pwd2=<your peer password>
> #proxy2=sip:127.0.0.1:5060
> #contact2=sip:xxx.xxx.xxx.xxx:5060
>
>
> # Up to 50 registrations are possible.
>
>
>
> tail -f /etc/ngcp-sems/etc/reg_agent.conf
>
> ...
>
> [#7f5cd6018700/5154] [update_uac_reply, trans_layer.cpp:2052] INFO:
> disable blacklisting: remote UA (127.0.0.1/5060) did reply
> [#7f5cd6018700] [update_uac_reply, trans_layer.cpp:2052] INFO: disable
> blacklisting: remote UA (127.0.0.1/5060) did reply
>
>
>> Il 15 febbraio 2019 alle 15.03 Daniel Grotti <dgrotti at sipwise.com> ha
>> scritto:
>>
>> Hi,
>> the second one is the correct one.
>> Try to use the second one, and then apply.
>> After that, what do you have in / etc/ngcp-sems/etc/reg_agent.conf ?
>>
>>
>>
>> --
>> Daniel Grotti
>>
>> Head of Customer Support Sipwise GmbH
>> e:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com> Europaring F15
>> t: +43(0)130120332 A-2345 Brunn Am Gebirge
>> w:www.sipwise.com <http://www.sipwise.com> FN: 305595f FG: LG Wiener Neustadt
>> On 2/15/19 3:01 PM, rleone.soluzioni at libero.it
>> <mailto:rleone.soluzioni at libero.it> wrote:
>>>
>>> Hi,
>>>
>>> Has anyone had the same issues with logging to external peers?
>>>
>>>
>>> if in
>>> /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2
>>>
>>>
>>> domain=xxx.xxx.xxx.xxx
>>> user=uservoip
>>> pwd=passvoip
>>> #proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
>>> [% IF sip_adv_ips.size -%]
>>> #contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
>>> [% ELSE -%]
>>> #contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
>>> [% END -%]
>>>
>>> in /var/log/ngcp/sems.log :
>>>
>>> [#7fe28c899740] [main, sems.cpp:634] INFO: SEMS 1.6.0 (x86_64/linux)
>>> started
>>>
>>> [#7fe27ae98700] [run, udp_trsp.cpp:312] INFO: Started SIP server
>>> UDP transport on 127.0.0.1:5080
>>>
>>> [#7f404838b700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f404828a700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f4048189700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f401bfff700] [run, tcp_trsp.cpp:807] INFO: Started SIP server TCP
>>> transport on 127.0.0.1:5080[
>>>
>>> [#7fc2a9bdd700] [sendto, udp_trsp.cpp:179] ERROR:
>>> sendto(14;xxx.xxx.xxx.xxx:5060): Invalid argument
>>>
>>> [#7fc2a9bdd700] [send_request, trans_layer.cpp:1311] ERROR: Error
>>> from transport layer
>>>
>>> otherwise
>>>
>>> in
>>> /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2 :
>>>
>>> domain=xxx.xxx.xxx.xxx
>>> user=uservoip
>>> pwd=passvoip
>>> proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
>>> [% IF sip_adv_ips.size -%]
>>> contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
>>> [% ELSE -%]
>>> contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
>>> [% END -%]
>>>
>>> in /var/log/ngcp/sems.log :
>>>
>>> [#7f4055ecf740] [XMLRPC2DIServer, XMLRPC2DI.cpp:384] INFO: IP =
>>> 127.0.0.1 port = 8090
>>> [#7f4055ecf740] [loadFile, AmConfigReader.cpp:82] WARNING: could not
>>> open configuration file '/etc/ngcp-sems/etc/cc_call_timer.conf': No
>>> such file or directory
>>> [#7f4055ecf740] [onLoad, CallTimer.cpp:81] INFO:
>>> cc_call_timerconfiguration file
>>> (/etc/ngcp-sems/etc/cc_call_timer.conf) not found, assuming default
>>> configuration is fine
>>> [#7f4055ecf740] [initMonitoring, AmSessionContainer.cpp:119] INFO:
>>> monitoring module not loaded, monitoring disabled
>>> [#7f4055ecf740] [main, sems.cpp:634] INFO: SEMS 1.6.0 (x86_64/linux)
>>> started
>>> [#7f404848c700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f404838b700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f404828a700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f4048189700] [run, udp_trsp.cpp:312] INFO: Started SIP server UDP
>>> transport on 127.0.0.1:5080
>>> [#7f401bfff700] [run, tcp_trsp.cpp:807] INFO: Started SIP server TCP
>>> transport on 127.0.0.1:5080[
>>>
>>> #7f67aa84a700/32199] [update_uac_reply, trans_layer.cpp:2052] INFO:
>>> disable blacklisting: remote UA (127.0.0.1/5060) did reply
>>>
>>> [#7f67aa749700] [update_uac_reply, trans_layer.cpp:2052] INFO:
>>> disable blacklisting: remote UA (127.0.0.1/5060) did reply
>>>
>>>
>>> with both configurations the registration fails
>>>
>>> version in use 6.5.3
>>> with previous 5.x is ok
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user
>>
>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20190215/ec8d7fea/attachment-0001.html>
More information about the Spce-user
mailing list