[Spce-user] Call does not stop after hang-up

[Marcos Pytel]

Thank you Andrew!

I attached a new file with 2 calls.




-----Mensaje original-----
De: Spce-user <spce-user-bounces at lists.sipwise.com> En nombre de Andrew Pogrebennyk
Enviado el: lunes 7 de enero del 2019 10:35
Para: Alex Lutay <alutay at sipwise.com>; spce-user at lists.sipwise.com
Asunto: Re: [Spce-user] Call does not stop after hang-up

On 01/07/2019 11:18 AM, Alex Lutay wrote:
> The only hint I can give you is open kamailio log using "less", find 
> "dlg_ontimeout(): timeout for dlg with CallID"
> and check the log lines nearby. Sometimes kamailio reports errors 
> without call-id, as a result you do not see them when "grep" logs by 
> call-id.

I think this is a side effect of misrouted message in a BYE, where kamailio reports that the dialog expired due to timeout. This does not point at cause of the issue, but is rather a symptom that something went unexpected ways. For example, it could be logged due to dialog module noack_timeout (1 minute by default) since the message appears in roughly one minute plus some seconds after BYE is received. In any case, this is a passive message related to active dialogs tracking in kamailio.

Marcos wrote that the issue occurs with one specific equipment type, which makes me think this is an endpoint issue, e.g. end device is sending incorrect contact or record-route in the 200 ok message. I have encountered some devices in the past that send server's FQDN rather that its own public IP In contact header. As a result, the message will be looped and/or dropped inside kamailio. Those are some of the points to check, but the file I have received from Marcos in private was corrupted
- probably stopped in the middle of capture (wireshark says "The capture file appears to be damaged or corrupt.
(pcap: File has 1634614131-byte packet, bigger than maximum of 262144)") so I have not managed to check this and also didn't have time to follow-up.

Please send a new file if you still need help on this Marcos.

Andrew
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
A non-text attachment was scrubbed...
Name: error_calls.pcap
Type: application/octet-stream
Size: 118106 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20190108/336e612a/attachment-0001.pcap>