[Spce-user] RTP ports and peerings

[lyndabenet]

hi,
In the peering group if you press "Details" and than move the mouse on the right side of the Signalling IP, you can choose "Preferences" button, than move down the list to "Nat and Media Flow Control" and choose your option you have configured in Config.yml file for "ext" or "int". Maybe that helps!
"rtp_interface" = Logical RTP interface to use for media packets.

The Operation Manual has this in chapter 13.2.3    Extra SIP and RTP Sockets.

Check it out and see what you can do!
https://www.sipwise.com/doc/mr8.5.2/handbook-ce.pdf

L.


Sent with ProtonMail Secure Email.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Friday, November 27, 2020 4:17 PM, Alex Lutay <alutay at sipwise.com> wrote:

> Hi Jiri,
>
> You are asking about "RTP ports" in subject
> and "RTP IP" in email body.
>
> RTP IP will be the same as SIP IP by default and
> can be changed by smart network.yml configuration,
> see sip_ext and rtp_ext network types there.
>
> RTP ports cab be defined as range for the entire
> system only, see the following options in config.yml:
>
> > rtpproxy:
> > maxport: 44999
> > minport: 30000
>
> I hope it answered your question.
> Have a nice day!
>
> On 11/27/20 3:22 PM, Jiri Ptacnik wrote:
>
> > Hello all,
> > what if some peering partners provide:
> >
> > -   specific IP for SIP and second IP for RTP? Is it possible to
> >     configure such peering?
> >
> >
> > Thanks
> > J. George P.
>
> --
>
> Alex Lutay
>
> -----------
>
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com