[Spce-user] Register a PBX to SipWise CE

[Matthias Hohl]

Again: what setup do you want?

Create a subscriber on SPCE and connect your pbx via this subscriber and phones on the pbx.
Then create a peering on SPCE and connect them to a Carrier SIP Trunk provider.

Thats normal setup.

If you want a PBX as your carrier, use IP Athentification or enable user/pass authentification for peerings.

Check handbook for details.

=> create peering
=> create subscriber

All in all, read the handbook carefully


> Am 28.09.2020 um 21:28 schrieb Neofone Info <info at neofone.al>:
> 
> 
> hello,
> 
> 
> 
> I have a Sip Trunk that is with registration. So i need it to receive calls. Why this seem so strange you can do it in Asterisk in trunks.
> 
> Thanks
> 
> 
> 
> On 9/28/2020 8:02 PM, Matthias Hohl wrote:
>> Hello,
>>  
>> no it is definitely no PBX at the end of the day.
>> It is a SIP server solution for providing a peering connection to several hundreds or thousands of subscriber.
>> I really don’t get the point for what reason you want to connect a SPCE to a PBX.. what is your plan?
>>  
>> Normally it goes this way: PTSN/SIP-NNI => SPCE => PBX
>>  
>> For sure you can, but you have to enable user/pass authenficiation for peerings.
>> But anyway, this is not common… normally you do Peering connections via ip authorization.
>>  
>> But like I told before, I really don’t get the point, what you want to do with that.
>>  
>>  
>> Von: Neofone Info <info at neofone.al> 
>> Gesendet: Montag, 28. September 2020 19:25
>> An: Matthias Hohl <matthias.hohl at telematica.at>; 'Walter Klomp' <walter at myrepublic.net>
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: AW: [Spce-user] Register a PBX to SipWise CE
>>  
>> I have information that can be done in CE.
>> 
>> CE is not a PBX at the end of the day? why i can register a CE to a PBX and can't do the same with a PBX register in CE? i have specific username and password of PBX that can't be changed.
>> 
>> with register i mean the registration process of a device. in a sip client you register a subscriber i need this also in CE.
>> 
>> peering does not have option to register for incoming calls or at least i didn't found it.
>> 
>> Thanks
>> 
>>  
>> 
>> On 9/28/2020 5:32 PM, Matthias Hohl wrote:
>> Hello,
>>  
>> i think you misunderstand the workflow of the SPCE.
>> You can’t register the SPCE as a subscriber on the PBX.
>> You need to register the PBX as a subscriber on the SPCE!
>>  
>> So you create a new subscriber on the SPCE and connect your PBX via the SPCE IP and the created Username and Password of the subscriber.
>>  
>> If you want to connect your PBX as a peering to the SPCE, really don’t know for what reason, than you can create a SPCE Peering and connect the SPCE to the PBX, but I really don’t know why you want to do this.
>>  
>>  
>> Von: Neofone Info <info at neofone.al> 
>> Gesendet: Montag, 28. September 2020 17:09
>> An: Walter Klomp <walter at myrepublic.net>
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: [Spce-user] Register a PBX to SipWise CE
>>  
>> so you are saying that in a subscriber where i need to create username and password instead of this i enter username and password of the other PBX that i want to register in sipwise?
>> 
>> i have the credential of another PBX and want to register in sipwise.
>> 
>>  
>> 
>> thanks
>> 
>> On 9/28/2020 4:25 PM, Walter Klomp wrote:
>> Just create a subscriber and use the username and password to register your PBX to it. 
>>  
>> On Mon, 28 Sep 2020 at 21:00, Neofone Info <info at neofone.al> wrote:
>> I am checking to configure a PBX in SipWice CE. Register it in sipwise
>> 
>> 
>> 
>> There is not information how i can register a PBX with username password 
>> 
>> and host in sipwise CE.
>> 
>> 
>> 
>> can anyone send a link where this is covered or provide information how 
>> 
>> i can register a PBX in sipwise to receive calls?
>> 
>> 
>> 
>> thanks
>> 
>> 
>> 
>> 
>> 
>> -- 
>> 
>> Spce-user mailing list
>> 
>> Spce-user at lists.sipwise.com
>> 
>> https://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>> 
>> --
>>  
>> Warmest Regards,
>> 
>> 
>> Walter Klomp
>> Head of Voice & Systems
>> MyRepublic Limited
>> T: +65 6816 1120
>> F: +65 6717 2031
>>  
>> MyRepublic Limited
>> 11 Lorong 3 Toa Payoh Block B Jackson Square
>> #04-11/15 Singapore 319579
>> 
>> myrepublic.com.sg
>> Follow us on: Twitter | Facebook | LinkedIn
>>  
>> 
>> 
>> The contents of this email and any attachments are confidential and may also be privileged. You must not disseminate the contents of this email and any attachments without permission of the sender. If you have received this email by mistake, please delete all copies and inform the sender immediately. You may refer to our company's Privacy Policy here.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200929/9e4b3365/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2373 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200929/9e4b3365/attachment-0002.p7s>