[Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls through Trunk

[gregch at usip.ca]

Thank you Viraj,

 

I will send you logs from CUBE of working and not working logs also
configuration of the CUBE. What log should I send you from kamailio?

If you don't mind I will send you those logs in private since there is too
much sensitive information in there.

 

I feel like I hit the brick wall and cannot seems to find the progelm

 

Thank your input Viraj

 

Greg

 

From: VoIP Mail <voip at 1469.nl> 
Sent: March 18, 2022 12:10 AM
To: gregch at usip.ca; spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls
through Trunk

 

Hi,

 

I got the same setup but without cucm and with webex calling.

 

Could you send me the logs so I can help you better. Also the configuration
of CUBE will help to understand the problem. 

 

Kind regards,

Viraj

  _____  

From: gregch at usip.ca <mailto:gregch at usip.ca>  <gregch at usip.ca
<mailto:gregch at usip.ca> >
Sent: Wednesday, March 16, 2022 1:58:50 AM
To: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
<spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com> >
Subject: [Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls
through Trunk 

 

Sipwise 5.5.9

CUBE-Version : 11.5.2

SW-Version : 15.7.3.M8, Platform CISCO2911/K9

 

Setup

 

CUCM ------ Cisco CUBE ------(Firewall) ------ (Firewall) ------ SIPWISE
(through trunking.PSTN) ------ (Firewall) ------- PSTN (peer)

 

Three domains on SIPWISE

*	Default (peers)
*	residential.PSTN
*	trunking.PSTN

 

Have a problem of CUBE not being about to dial out to PSTN through SIPWISE

 

Working calls:

*	from CUCM  -> CUBE to Subscriber number on trunking.PSTN domain
*	from CUCM -> CUBE to Subscriber number on residential.PSTN domain
*	from PSTN incoming to CUCM through CUBE

 

Not working calls

*	from CUCM -> CUBE to +14165551212(example) PSTN number (that is not
registered with any domain in SIPWISE)

 

Have other two trunks to Asterix PBXs and they are working fine for in/out
calls but somehow cannot make this work with Cisco CUBE and SIPWISE

 

Any suggestions?

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220321/54a3251c/attachment-0002.html>