[Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls through Trunk

[VoIP Mail]

Hi Greg,

I would like to see the contents of kamailio-proxy.log and kamailio-lb.log in the /var/log/ngcp folder.

I had the same problem integrating the CUBE with NGCP, but after screening the CUBE his config and sipwise there was a mismatch in the configuration. I would check if you got the same problem.

Kind regards,
Viraj

From: gregch at usip.ca <gregch at usip.ca>
Sent: Monday, 21 March 2022 20:27
To: VoIP Mail <voip at 1469.nl>; spce-user at lists.sipwise.com
Subject: RE: [Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls through Trunk

Thank you Viraj,

I will send you logs from CUBE of working and not working logs also configuration of the CUBE. What log should I send you from kamailio?
If you don’t mind I will send you those logs in private since there is too much sensitive information in there.

I feel like I hit the brick wall and cannot seems to find the progelm

Thank your input Viraj

Greg

From: VoIP Mail <voip at 1469.nl<mailto:voip at 1469.nl>>
Sent: March 18, 2022 12:10 AM
To: gregch at usip.ca<mailto:gregch at usip.ca>; spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>
Subject: Re: [Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls through Trunk

Hi,

I got the same setup but without cucm and with webex calling.

Could you send me the logs so I can help you better. Also the configuration of CUBE will help to understand the problem.

Kind regards,
Viraj
________________________________
From: gregch at usip.ca<mailto:gregch at usip.ca> <gregch at usip.ca<mailto:gregch at usip.ca>>
Sent: Wednesday, March 16, 2022 1:58:50 AM
To: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com> <spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>>
Subject: [Spce-user] Cisco CUBE and Sipwise: Cannot make outbound calls through Trunk


Sipwise 5.5.9

CUBE-Version : 11.5.2

SW-Version : 15.7.3.M8, Platform CISCO2911/K9



Setup



CUCM ------ Cisco CUBE ------(Firewall) ------ (Firewall) ------ SIPWISE (through trunking.PSTN) ------ (Firewall) ------- PSTN (peer)



Three domains on SIPWISE

  *   Default (peers)
  *   residential.PSTN
  *   trunking.PSTN



Have a problem of CUBE not being about to dial out to PSTN through SIPWISE



Working calls:

  *   from CUCM  -> CUBE to Subscriber number on trunking.PSTN domain
  *   from CUCM -> CUBE to Subscriber number on residential.PSTN domain
  *   from PSTN incoming to CUCM through CUBE



Not working calls

  *   from CUCM -> CUBE to +14165551212(example) PSTN number (that is not registered with any domain in SIPWISE)



Have other two trunks to Asterix PBXs and they are working fine for in/out calls but somehow cannot make this work with Cisco CUBE and SIPWISE



Any suggestions?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20220322/dcfdc570/attachment-0002.html>