[Spce-user] Assistance with Peering

[Trent Creekmore]

Hello Marco,

Thanks for that advice.

I followed your guidance and all I see is the following, repeating:

ngcp-sems[1075]: [#7feb94a0c700] [run, AmThread.cpp:254] DEBUG: thread 
140649785112320 still running.
ngcp-sems[1075]: [#7feb94a0c700] [run, AmThread.cpp:248] DEBUG: thread 
140649784059648 is to be processed


This is with mr11.2.1


Thanks again,

Trent


On 4/3/23 02:05, Marco Capetta via Spce-user wrote:
> Hi Trent,
>
> the peer remote authentication should work out of the box setting the 
> preferences as Alejandro suggested.
> If it still doesn't work for you, I suggest to:
> * remove the flag from peer_auth_register preference and wait some minutes
> * increase the log level of sems with the command:
>      ngcp-loglevel sbc -sv
> * set the flag in peer_auth_register preference
> * check in sems logs if you see some REGISTER message is generated or 
> if you see some ERROR message
> * after you completed the test, remember to decrease the log level of 
> sems with the command:
>      ngcp-loglevel sbc -sd
>
> If you notice some error, please report it here so we can investigate.
>
> Thanks
> Marco
>
> On 03/04/23 02:30, Trent Creekmore wrote:
>>
>> Hello Alejandro,
>>
>> I double checked the "peer_auth_register" and it does for sure have a 
>> check mark in the "Value" field.
>>
>> Thanks for taking the time to respond.
>>
>>
>> Trent
>>
>>
>> On 4/2/23 17:41, Alejandro Mejia Evertsz wrote:
>>> Hello Trent
>>>
>>> Did you enable "peer_auth_register" on the peering server preferences?
>>> You may find the parameter close to the peer_auth_user/pass 
>>> parameters where you entered your registration credentials.
>>>
>>> On Sun, Apr 2, 2023 at 1:40 PM Trent Creekmore <trent at lindows.org> 
>>> wrote:
>>>
>>>     Hello.
>>>
>>>
>>>     Following the documentation:
>>>
>>>     https://www.sipwise.com/doc/mr11.2.1/spce/ce/mr11.2.1/basicconfiguration/basicconfiguration.html#_creating_peering_servers
>>>
>>>     I created a peering server as the guide shows to a provider.
>>>     However,
>>>     after setting up the needed info and authentication details, I
>>>     am not
>>>     seeing any indications of the system even trying to make any
>>>     connection/registration attempts.
>>>
>>>     Since there is nothing in the web interface to check, I used
>>>     sngrep and
>>>     watched for a while. Even going as far as rebooting the server
>>>     and still
>>>     nothing.
>>>
>>>     Any helpful tips on this?
>>>
>>>     Thanks!
>>>
>>>
>>>     -- 
>>>     Spce-user mailing list
>>>     Spce-user at lists.sipwise.com
>>>     http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>>>
>>
>
> -- 
> *Marco Capetta *
> R&D Manager
>
> Sipwise GmbH | an ALE Company <http://www.sipwise.com>
> c/o ALE International – Austria Branch
> Saturn Tower
> Leonard-Bernstein-Straße 10
> 1220 Vienna, Austria
>
> Email: mcapetta at sipwise.com
> Website: www.sipwise.com <http://www.sipwise.com>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20230403/77710635/attachment.html>