[Spce-user] Setting P-Called-Party-ID

[Carriba UG - sip:wise]

Hello Andrew,

The problem is that the User-Provided CLI "testuser" is taken from the From,
and now the provisioned User-Provided CLI is used.

It should be the "1555555" number not the provisioned. 

The s@ problem is another problem...
Thanks, I have changed it from peer to user.

-----Ursprüngliche Nachricht-----
Von: Andrew Pogrebennyk [mailto:apogrebennyk at sipwise.com] 
Gesendet: Donnerstag, 17. Oktober 2013 14:04
An: sipwise at carriba.org; spce-user at lists.sipwise.com
Betreff: Re: AW: AW: [Spce-user] Setting P-Called-Party-ID

Hi,

On 10/17/2013 12:41 PM, Carriba UG - sip:wise wrote:
> I have also tried this, but it is not working.

You need to be more specific what exactly is not working.
In the log I see:
- Setting From to '<sip:1555555 at xx.xx.xx>'
- Setting PAI to '<sip:testuser at xx.xx.xx>'
Which is OK, isn't it?

Now back to original problem with registered contact sip:s at x.x.x.x:5060 in
RURI and To - I don't see this any more, because the last call is to a SIP
peering and not to a subscriber. And you get back a 183, which looks pretty
normal to me, perhaps you just need to add a rewrite rule.

But if you are sending the call to your customer's PBX it should be a
subscriber instead of a peer. So please be more verbose about the issue.

cheeers,
Andrew