[Spce-user] Register a PBX to SipWise CE
Neofone Info
info at neofone.al
Tue Sep 29 07:17:13 EDT 2020
“peer_auth_proxy” can be only an IP at can not be a domain name?
On 9/29/2020 12:45 PM, Daniel Grotti wrote:
> Hi,
> you cannot really see that on the GUI.
> You can check the kamailio.sems_registrations table in the mysql.
> Otherwise you can see that on the PBX side.
>
>
> Cheers,
>
>
> Daniel Grotti
>
> Head of Customer Support Sipwise GmbH
> e: dgrotti at sipwise.com Europaring F15
> t: +43(0)130120332 A-2345 Brunn Am Gebirge
> w: www.sipwise.com FN: 305595f FG: LG Wiener Neustadt
>
> On 9/29/20 12:40 PM, Neofone Info wrote:
>> Hi,
>>
>> Thank you for the offer but maybe later I will check it
>>
>> One last question where I can see if SPCE is register on behalf of
>> the subscriber to the external PBX system with REMOTE AUTHENTICATION?
>>
>>
>>
>> On 9/29/2020 12:35 PM, Daniel Grotti wrote:
>>> Hi,
>>> what it is needed is described here:
>>> https://sipwise.com/doc/mr9.0.1/spce/?_href=ar01s06.html#creating-subscribers
>>>
>>>
>>>
>>> They are not related to the remote authentication.
>>> "Remote authentication" is inside subscriber's preferences.
>>>
>>>
>>> Please consider to buy a CE training, if you really need.
>>>
>>> Regards,
>>>
>>>
>>> Daniel Grotti
>>>
>>> Head of Customer Support Sipwise GmbH
>>> e: dgrotti at sipwise.com Europaring F15
>>> t: +43(0)130120332 A-2345 Brunn Am Gebirge
>>> w: www.sipwise.com FN: 305595f FG: LG Wiener Neustadt
>>>
>>> On 9/29/20 12:17 PM, Neofone Info wrote:
>>>> Thank you Daniel,
>>>>
>>>> What is need when creating this subscriber?
>>>>
>>>> What should enter in these fields? Or they are not related to the
>>>> REMOTE AUTHENTICATION fields?
>>>>
>>>> E164 Number
>>>> Email
>>>> Web Username
>>>> Web Password
>>>> SIP Username
>>>> SIP Password
>>>> Lock Level
>>>> Status
>>>> External ID
>>>>
>>>>
>>>> Thanks
>>>>
>>>>
>>>> On 9/29/2020 11:13 AM, Daniel Grotti wrote:
>>>>> Hi,
>>>>> you can tell the SPCE to register on behalf of the subscriber to
>>>>> the external PBX system by just filling the preferences REMOTE
>>>>> AUTHENTICATION in the subscriber's preferences:
>>>>>
>>>>> “peer_auth_user”,
>>>>> “peer_auth_pass”,
>>>>> “peer_auth_proxy”
>>>>> “peer_auth_register”
>>>>>
>>>>> with the external PBX credentials.
>>>>>
>>>>> Once the preferences have been saved, the SPCE will automatically
>>>>> send a REGISTER request to the PBX system.
>>>>>
>>>>> Your end client will be register on SPCE, whicle the SPCE will be
>>>>> registered on behalf the end user to the external PBX.
>>>>>
>>>>> Not really sure why you need this scenario, but this is what you
>>>>> can achieve with SPCE on this matter.
>>>>>
>>>>> Cheers,
>>>>>
>>>>>
>>>>> Daniel Grotti
>>>>>
>>>>> Head of Customer Support Sipwise GmbH
>>>>> e: dgrotti at sipwise.com Europaring F15
>>>>> t: +43(0)130120332 A-2345 Brunn Am Gebirge
>>>>> w: www.sipwise.com FN: 305595f FG: LG Wiener Neustadt
>>>>>
>>>>> On 9/28/20 9:28 PM, Neofone Info wrote:
>>>>>> hello,
>>>>>>
>>>>>>
>>>>>> I have a Sip Trunk that is with registration. So i need it to
>>>>>> receive calls. Why this seem so strange you can do it in Asterisk
>>>>>> in trunks.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>> On 9/28/2020 8:02 PM, Matthias Hohl wrote:
>>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> no it is definitely no PBX at the end of the day.
>>>>>>>
>>>>>>> It is a SIP server solution for providing a peering connection
>>>>>>> to several hundreds or thousands of subscriber.
>>>>>>>
>>>>>>> I really don’t get the point for what reason you want to connect
>>>>>>> a SPCE to a PBX.. what is your plan?
>>>>>>>
>>>>>>> Normally it goes this way: PTSN/SIP-NNI => SPCE => PBX
>>>>>>>
>>>>>>> For sure you can, but you have to enable user/pass
>>>>>>> authenficiation for peerings.
>>>>>>>
>>>>>>> But anyway, this is not common… normally you do Peering
>>>>>>> connections via ip authorization.
>>>>>>>
>>>>>>> But like I told before, I really don’t get the point, what you
>>>>>>> want to do with that.
>>>>>>>
>>>>>>> *Von:*Neofone Info <info at neofone.al>
>>>>>>> *Gesendet:* Montag, 28. September 2020 19:25
>>>>>>> *An:* Matthias Hohl <matthias.hohl at telematica.at>; 'Walter
>>>>>>> Klomp' <walter at myrepublic.net>
>>>>>>> *Cc:* spce-user at lists.sipwise.com
>>>>>>> *Betreff:* Re: AW: [Spce-user] Register a PBX to SipWise CE
>>>>>>>
>>>>>>> I have information that can be done in CE.
>>>>>>>
>>>>>>> CE is not a PBX at the end of the day? why i can register a CE
>>>>>>> to a PBX and can't do the same with a PBX register in CE? i have
>>>>>>> specific username and password of PBX that can't be changed.
>>>>>>>
>>>>>>> with register i mean the registration process of a device. in a
>>>>>>> sip client you register a subscriber i need this also in CE.
>>>>>>>
>>>>>>> peering does not have option to register for incoming calls or
>>>>>>> at least i didn't found it.
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> On 9/28/2020 5:32 PM, Matthias Hohl wrote:
>>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> i think you misunderstand the workflow of the SPCE.
>>>>>>>
>>>>>>> You can’t register the SPCE as a subscriber on the PBX.
>>>>>>>
>>>>>>> You need to register the PBX as a subscriber on the SPCE!
>>>>>>>
>>>>>>> So you create a new subscriber on the SPCE and connect your PBX
>>>>>>> via the SPCE IP and the created Username and Password of the
>>>>>>> subscriber.
>>>>>>>
>>>>>>> If you want to connect your PBX as a peering to the SPCE,
>>>>>>> really
>>>>>>> don’t know for what reason, than you can create a SPCE
>>>>>>> Peering and
>>>>>>> connect the SPCE to the PBX, but I really don’t know why you
>>>>>>> want
>>>>>>> to do this.
>>>>>>>
>>>>>>> *Von:*Neofone Info <info at neofone.al> <mailto:info at neofone.al>
>>>>>>> *Gesendet:* Montag, 28. September 2020 17:09
>>>>>>> *An:* Walter Klomp <walter at myrepublic.net>
>>>>>>> <mailto:walter at myrepublic.net>
>>>>>>> *Cc:* spce-user at lists.sipwise.com
>>>>>>> <mailto:spce-user at lists.sipwise.com>
>>>>>>> *Betreff:* Re: [Spce-user] Register a PBX to SipWise CE
>>>>>>>
>>>>>>> so you are saying that in a subscriber where i need to create
>>>>>>> username and password instead of this i enter username and
>>>>>>> password of the other PBX that i want to register in sipwise?
>>>>>>>
>>>>>>> i have the credential of another PBX and want to register in
>>>>>>> sipwise.
>>>>>>>
>>>>>>> thanks
>>>>>>>
>>>>>>> On 9/28/2020 4:25 PM, Walter Klomp wrote:
>>>>>>>
>>>>>>> Just create a subscriber and use the username and
>>>>>>> password to
>>>>>>> register your PBX to it.
>>>>>>>
>>>>>>> On Mon, 28 Sep 2020 at 21:00, Neofone Info <info at neofone.al
>>>>>>> <mailto:info at neofone.al>> wrote:
>>>>>>>
>>>>>>> I am checking to configure a PBX in SipWice CE.
>>>>>>> Register
>>>>>>> it in sipwise
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> There is not information how i can register a PBX with
>>>>>>> username password
>>>>>>>
>>>>>>> and host in sipwise CE.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> can anyone send a link where this is covered or provide
>>>>>>> information how
>>>>>>>
>>>>>>> i can register a PBX in sipwise to receive calls?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> thanks
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Spce-user mailing list
>>>>>>>
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> <mailto:Spce-user at lists.sipwise.com>
>>>>>>>
>>>>>>> https://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warmest Regards,
>>>>>>>
>>>>>>>
>>>>>>> <https://myrepublic.com.sg/>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Walter Klomp*
>>>>>>>
>>>>>>> Head of Voice & Systems
>>>>>>>
>>>>>>> MyRepublic Limited
>>>>>>>
>>>>>>> T: +65 6816 1120
>>>>>>>
>>>>>>> F: +65 6717 2031
>>>>>>>
>>>>>>> MyRepublic Limited
>>>>>>>
>>>>>>> 11 Lorong 3 Toa Payoh Block B Jackson Square
>>>>>>>
>>>>>>> #04-11/15 Singapore 319579
>>>>>>>
>>>>>>>
>>>>>>> myrepublic.com.sg <https://myrepublic.com.sg/>
>>>>>>>
>>>>>>> Follow us on: Twitter <https://twitter.com/myrepublic> |
>>>>>>> Facebook <https://facebook.com/myrepublicsg> | LinkedIn
>>>>>>> <https://www.linkedin.com/company/myrepublic>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /The contents of this email and any attachments are
>>>>>>> confidential and may also be privileged. You must not
>>>>>>> disseminate the contents of this email and any attachments
>>>>>>> without permission of the sender. If you have received this
>>>>>>> email by mistake, please delete all copies and inform the
>>>>>>> sender immediately. You may refer to our company's Privacy
>>>>>>> Policy here
>>>>>>> <https://myrepublic.net/sg/legal/terms-of-use-policies/privacy-policy/>./
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
More information about the Spce-user
mailing list